display mpls te te-class-tunnel
Function
The display mpls te te-class-tunnel command displays information about a specific or all TE tunnels associated with specified TE-classes.
Parameters
| Parameter | Description | Value |
|---|---|---|
| all |
Displays information about all TE tunnels associated with specified TE-classes. |
- |
| ct0 |
Class-Type 0. |
- |
| ct1 |
Class-Type 1. |
- |
| ct2 |
Class-Type 2. |
- |
| ct3 |
Class-Type 3. |
- |
| ct4 |
Class-Type 4. |
- |
| ct5 |
Class-Type 5. |
- |
| ct6 |
Class-Type 6. |
- |
| ct7 |
Class-Type 7. |
- |
| priority priority |
Specifies the priority value in a TE-class. |
The value is an integer ranges from 0 to 7. |
Example
The actual command output varies according to the device. The command output here is only an example.
# Display information about all TE tunnels associated with specified TE-classes.
<HUAWEI> display mpls te te-class-tunnel all
--------------------------------------------------
No. CT priority status tunnel name
------------------------------------------------------------------------
1 0 1 Valid Tunnel10
2 0 1 Valid Tunnel11
3 0 1 Valid Tunnel12
4 0 1 Valid Tunnel13
5 0 7 Invalid Tunnel11
1 0 1 Valid Tunnel20
2 0 1 Valid Tunnel21
3 0 1 Valid Tunnel22
4 0 1 Valid Tunnel23
5 0 7 Invalid Tunnel21
| Item | Description |
|---|---|
| No. | Sequent number. |
| CT | Service type. |
| priority | Holding priority value. |
| status | Whether a TE-class is valid:
|
| tunnel name | Name of a TE tunnel interface mapped to a CT. |