display mpls l2vpn qos vsi-name

Function

The display mpls l2vpn qos vsi-name command displays QoS information based on a specified VSI.

Format

display mpls l2vpn qos vsi-name vsi-name [ peer peer-id [ pw-id pw-id ] ]

Parameters

Parameter	Description	Value
vsi-name vsi-name	Specifies a VSI name.	The value is a string of 1 to 31 case-sensitive characters, spaces not supported.
peer peer-id	Specifies the IPv4 address of a peer router.	The value is an IPv4 address in dotted decimal notation (X.X.X.X), for example, 10.1.1.1.
pw-id pw-id	Specifies the L2VC ID for a PW.	The value is an integer ranging from 1 to 4294967295.

Parameter

Description

Value

vsi-name vsi-name

Specifies a VSI name.

The value is a string of 1 to 31 case-sensitive characters, spaces not supported.

peer peer-id

Specifies the IPv4 address of a peer router.

The value is an IPv4 address in dotted decimal notation (X.X.X.X), for example, 10.1.1.1.

pw-id pw-id

Specifies the L2VC ID for a PW.

The value is an integer ranging from 1 to 4294967295.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
l2vpn	read

Usage Guidelines

Usage Scenario

The VPN services carried over a tunnel have different resource requirements. To meet the resource requirements of L2VPN services carried over a tunnel without affecting the quality of other VPN services, configure L2VPN QoS. To check QoS information about L2VPN after QoS is configured, run the display mpls l2vpn qos command.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display QoS information based on a specified VSI.

<HUAWEI> display mpls l2vpn qos vsi-name 1
Using VSIName 1 Display VSI QoS:
------------------------------------------------
  L2VPN QoS CIR value        : 111 
  L2VPN QoS PIR value        : 1200 
  L2VPN QoS qos-profile name : --

**Table 1** Description of the **display mpls l2vpn qos vsi-name** command output
Item	Description
Using VSIName 1 Display VSI QoS	QoS information about a VPLS based on a specified VSI.
L2VPN QoS CIR value	CIR value (for VPN QoS). The value 0 indicates that no information rate is committed.
L2VPN QoS PIR value	PIR value (for VPN QoS).
L2VPN QoS qos-profile name	VPN QoS profile name.