display acl user-group

Function

The display acl user-group command displays the ACL that is applied to a specified user-group or any user-group.

This command is supported only on the NetEngine 8000 F1A.

display acl user-group { user-group-name | any }

Parameter	Description	Value
user-group-name	Specifies the name of a user-group.	The value is a string of 1 to 32 characters.
any	Specifies the any user-group.	-

Parameter

Description

Value

user-group-name

Specifies the name of a user-group.

The value is a string of 1 to 32 characters.

any

Specifies the any user-group.

All views

1: Monitoring level

Task Name	Operations
vas	read

Usage Scenario

Multiple rules in a user-based ACL can be applied to a user-group. This command can be used to display the ACL that is applied to a user-group.

Precautions

In VS mode, this command is supported only by the admin VS.

The actual command output varies according to the device. The command output here is only an example.

# Display the ACL that is applied to a user-group named test.

<HUAWEI> display acl user-group test
The following ACL match user-group test:
acl ipv4:
 6000, 6001
acl ipv6:
 6000

**Table 1** Description of the **display acl user-group** command output
Item	Description
acl ipv4	IPv4 ACL that is applied to a user-group named test.
acl ipv6	IPv6 ACL that is applied to a user-group named test.