display acl service-group

Function

The display acl service-group command displays the user-based ACL that is applied to a specified or any service group.

This command is supported only on the NetEngine 8000 F1A.

Format

display acl service-group { group-name | any }

Parameters

Parameter	Description	Value
group-name	Specifies the name of a service group.	The value is a string of 1 to 32 characters.
any	Indicates any service group.	-

Parameter

Description

Value

group-name

Specifies the name of a service group.

The value is a string of 1 to 32 characters.

any

Indicates any service group.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
vas	read

Usage Guidelines

Usage Scenario

Multiple rules in a user-based ACL can be applied to a user group. This command can be used to display the UCL that is applied to a service group.

Multiple rules in a user-based ACL can be applied to a service group. To display the user-based ACL that is applied to a specified or any service group, run the display acl service-group command.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display the ACL that is applied to a service group named test.

<HUAWEI> display acl service-group test
The following ACL match service-group test:
Acl ipv4:
6000, 6001
Acl ipv6:
  6000

**Table 1** Description of the **display acl service-group** command output
Item	Description
Acl ipv4	IPv4 ACL that is applied to a service group named test. If the value is empty, no IPv4 ACL is applied to the service group.
Acl ipv6	IPv6 ACL that is applied to a service group named test. If the value is empty, no IPv6 ACL is applied to the service group.