display auto-upgrade model

Function

The display auto-upgrade model command displays whether the automatic logic upgrade function is enabled for boards.

Format

display auto-upgrade model

Parameters

None

Views

User view, System view

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
config	read

Usage Guidelines

Usage Scenario

On the Router, the automatic logic upgrade function can be enabled or disabled based on configurations.

If the function is enabled, the system compares the logic version of a newly inserted board with the current system logic version or compares the log version of boards with a newly upgraded system logic version. If any difference is found, the logic version of the boards is updated.

The display auto-upgrade model command is used to query whether the automatic logic upgrade function is enabled for boards.

In VS mode, this command is supported only by the admin VS.

Example

The actual command output varies according to the device. The command output here is only an example.

# Check whether the automatic logic upgrade function is enabled for boards.

<HUAWEI> display auto-upgrade model
The auto-upgrade state is open.

**Table 1** Description of the **display auto-upgrade model** command output
Item	Description
The auto-upgrade state is open.	The auto-upgrade state is open.