display board-current board-power
Function
The display board-current command displays information about the current of boards.
The display board-power command displays power consumption of a board.
Usage Guidelines
Usage Scenario
- The display board-current command can be used to view information about current of boards. If the parameter slot-id is specified, information about the current of a specified board is displayed. If the parameter slot-id is not specified, information about the current of all boards is displayed.
- The display board-power command can be used to view power consumption of a board. If the parameter slot-id is specified, power consumption information about a specified board is displayed. If the parameter slot-id is not specified, power consumption information about all boards is displayed. In fan module, the voltage, current and current power consumption is display to NA, since there is no sensor installing in a fan.
Precautions
In VS mode, this command is supported only by the admin VS.
Example
The actual command output varies according to the device. The command output here is only an example.
<HUAWEI> display board-power slot 1 Slot: 1 PCB Volt(V) Curr(A) Power(W) Max(W) Efficiency(%) ---------------------------------------------------------------------- GPR8CQ20YS NA NA NA 420.00 100%
| Item | Description |
|---|---|
| PCB | Board type. |
| Slot | slot-id. |
| Volt(V) | Voltage of the board. |
| Curr(A) | Current of the board. |
| Power(W) | Current power consumption of the board. |
| Max(W) | Maximum power consumption, which is measured in the case of line-rate forwarding of all services at a high temperature of 50°C. It is different from the typical power consumption measured at 25°C by using the international standard IMIX traffic model and simulating the live network traffic model with various-length packets. |
| Efficiency(%) | Power efficiency rate. |