display backup-user

Function

The display backup-user command displays information of backup users.

This command is supported only on the NetEngine 8000 F1A.

Format

display backup-user [ user-id id | username [ include ] user-name ] [ slave ]

Parameters

Parameter	Description	Value
user-id id	Specifies an ID for a backup user.	The value is an integer ranging from 0 to 3145727.
username user-name	Specifies a user name.	The value is a string of 1 to 253 characters.
include	Include.	-

Parameter

Description

Value

user-id id

Specifies an ID for a backup user.

The value is an integer ranging from 0 to 3145727.

username user-name

Specifies a user name.

The value is a string of 1 to 253 characters.

include

Include.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
rui	read

Usage Guidelines

Usage Scenario

To view information of a backup user after multi-system hot standby is deployed, run the display backup-user command.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display information of the backup users.

<HUAWEI> display backup-user
Remote-backup-service: rbs2
  Total Users Numer: 100
------------------------------------------------------------------------
 100     101     102     103     104     105     106     107     108     109

 110     111     112     113     114     115     116     117     118     119

 120     121     122     123     124     125     126     127     128     129

 130     131     132     133     134     135     136     137     138     139

 140     141     142     143     144     145     146     147     148     149

 150     151     152     153     154     155     156     157     158     159

 160     161     162     163     164     165     166     167     168     169

 170     171     172     173     174     175     176     177     178     179

 180     181     182     183     184     185     186     187     188     189

 190     191     192     193     194     195     196     197     198     199

------------------------------------------------------------------------
  Local Users Number	:100
  Remote Users Number	:0

# Display information of the backup user with ID of 60.

<HUAWEI> display backup-user user-id 60
-----------------------------------------------------------
                 RUI Backup User information
  -----------------------------------------------------------
  UserIndex       : 60          Cid       : 60
  SessionID       : 0           MAC       : 00e0-fc12-3456
  PeVlan          : 700         CeVlan    : 0
  Vrid            : 0           IP        : 10.1.255.94
  TriggerSendFlag : 1           Vpn       : --
  BackUpID        : 1           RBP       : zhhg
  ProcessID       : 3           RBS       : tnl7-8
  Interface       : GigabitEthernet0/1/0.700
  UserName        : 0700@ll
  Backup from     : Remote Server
  User mode       : virtual
  -----------------------------------------------------------

**Table 1** Description of the **display backup-user** command output
Item	Description
Total Users Numer	Total number of users of the remote backup service rbs2.
Local Users Number	Number of users who go online locally.
Remote Users Number	Number of users who go online remotely.
Backup from	User source. Remote Server: The user goes online through the remote server. Local Server: The user goes online through the local server.
User mode	Backup mode: hot: hot backup. warm: warm backup (not supported). virtual: virtual backup. The backup mode can be configured using the peer-backup command.
UserIndex	Index of the backup user.
Cid	Control ID of the user.
SessionID	Session ID of a PPP user (the value is 0 for an IPoE user).
MAC	MAC address of the backup user.
PeVlan	Outer VLAN ID of a backup user packet.
CeVlan	Inner VLAN ID of a backup user packet.
Vrid	VRRP ID of the backup user.
IP	IP address of the backup user.
TriggerSendFlag	User status. 1: The user has logged in. 0: The user does not log in.
Vpn	VPN to which the user belongs.
BackUpID	Backup ID of the user.
RBP	Name of the remote backup profile.
ProcessID	ID of the remote backup service configured on the interface through which the user logs in.
RBS	Name of a remote backup server.
Interface	Interface to which the backup user is connected.
UserName	Name of the backup user.
Remote-backup-service	Name of the remote backup service.
Link Local Address	Link Local Address.
WanAddress	User Wan Address.
WanPrefixLen	User Wan Address Prefix Length.