display disaster-recovery

Function

The display disaster-recovery command displays disaster recovery configurations on a vBRAS-UP.

This command is supported only on the NetEngine 8000 F1A.

Format

display disaster-recovery [ slave ]

Parameters

Parameter	Description	Value
slave	Display information on the slave control board.	-

Parameter

Description

Value

slave

Display information on the slave control board.

Views

All views

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
bras-control	read

Usage Guidelines

Usage Scenario

To check disaster recovery configurations on a vBRAS-UP, run the display disaster-recovery command. Before you run the command, ensure that disaster recovery configurations, such as disaster recovery groups, master/backup role, and source and destination IP addresses, have been configured on the vBRAS-CP.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display disaster recovery configurations on a vBRAS-UP.

<HUAWEI> system-view
[~HUAWEI] display disaster-recovery
---------------------------------------------------------- 
  Configuration in the CP
  CP                    : 1.1.1.1     
  Master                : 1.1.1.1
  Slave                 : 2.2.2.2
  Openflow_cp           :3.3.3.3
  Vxlan_cp              :1.1.1.1
  Priority              : 100
  ----------------------------------------------------------
  Configuration in the CP
  CP                    : 2.2.2.2     
  Master                : 1.1.1.1
  Slave                 : 2.2.2.2
  Openflow_cp           :3.3.3.3
  Vxlan_cp              :1.1.1.1
  Priority              : 100    
  ----------------------------------------------------------
  Negotiation result
  Master                : 1.1.1.1
  Slave                 : 2.2.2.2
  ----------------------------------------------------------

**Table 1** Description of the **display disaster-recovery** command output
Item	Description
CP	vBRAS-CP that manages the vBRAS-UP.
Master	IP address of the master vBRAS-CP.
Slave	IP address of the backup vBRAS-CP.
Openflow_cp	IP address of an control channel.
Vxlan_cp	IP address of a protocol channel.
Priority	Priority of the vBRAS-CP's master/backup role.