display bas-interface

Function

The display bas-interface command displays information about a BAS interface.

This command is supported only on the NetEngine 8000 F1A.

Format

display bas-interface [ { interface-type interface-number | interface-name } [ access-number [ user-type ] | vlan ce-vlan [ qinq qinq-vlan ] ] ]

Parameters

Parameter	Description	Value
interface-type	Specifies interface type.	-
interface-number	Specifies interface number.	The value is a string of 1 to 49 characters.
interface-name	Specifies interface name.	The value is a string of 1 to 49 characters.
access-number	Displays the number of access users in each VLAN on a BAS interface. Only Layer 2 common users can be queried, and Layer 2 leased line users, Layer 2 VPN leased line users, and Layer 3 users cannot be queried.	-
user-type	Specifies user type.	-
vlan ce-vlan	Displays information in the specified VLAN of a bas interface. vlan-id Specifies the ID of a VLAN.	The value ranges from 1to 4094.
qinq qinq-vlan	Displays information in a specified QinQ VLAN on the bas interface.qinq-vlan Specifies the ID of a QinQ VLAN.	The value ranges from 1to 4094.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
bras-control	read

Usage Guidelines

Usage Scenario

If no parameter is specified, you can view brief information about all BAS interfaces. If <INTERFACE-TYPE> <INTERFACE-NUMBER> is specified, you can view the information about a specified interface.

Precautions

In VS mode, this command is supported only by the admin VS.

The display bas-interface <interface-type> <interface-number> access-number user-type command only supports being queried based on sub-interfaces.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display the number of VLAN access users on BAS interface GigabitEthernet 0/1/2.1.

<HUAWEI> display bas-interface gigabitethernet0/1/2.1 access-number
Interface                         p/cvlan          user-num             IPoE/max    PPPoE/max     IPoEv4/max     IPoEv6/max
 GigabitEthernet0/1/2.1            103/116          100                  10/-         20/30         10/20          0/30
 GigabitEthernet0/1/2.1            103/117          100                  10/-         20/30         10/20          0/30
 GigabitEthernet0/1/2.1            103/118          100                  10/-         20/30         10/20          0/30
 GigabitEthernet0/1/2.1            103/119          100                  10/-         20/30         10/20          0/30
 GigabitEthernet0/1/2.1            104/120          100                  10/-         20/30         10/20          0/30
 GigabitEthernet0/1/2.1            104/121          100                  10/-         20/30         10/20          0/30
 GigabitEthernet0/1/2.1            104/122          100                  10/-         20/30         10/20          0/30
 GigabitEthernet0/1/2.1            104/123          100                  10/-         20/30         10/20          0/30
 GigabitEthernet0/1/2.1            104/124          100                  10/-         20/30         10/20          0/30

# Display the access delay information in load-balance-group mode.

<HUAWEI> display bas-interface GigabitEthernet 0/1/9
  Access type                                  : Layer2-subscriber
  BASIF state                                  : Updated
  BASIF name                                   : GigabitEthernet0/1/9
  Pre-authentication default domain            : default0
  Authentication default domain                : default1
  Replace authentication domain forcibly       : None
  Roam domain                                  : default1
  Permit domain                                : -
  Deny domain                                  : -
  Permit domain list                           : -
  Deny domain list                             : -
  Accounting copy RADIUS server                : -
  Authentication method                        : [ppp]
  IPV6 Authentication method                   : [ppp]
  Nas port type                                : ethernet (15)
  Client-id(DHCPv4 Option61) Hardware-type     : -
  Vendor-class(DHCPv4 option60/DHCPv6 option16): Off
  DHCPv6 vendor-Class code                     : 16
  DHCPv6 vendor-Class offset                   : 0
  Client option82                              : Off
  Client access-line-id(DHCPv4 option82/DHCPv6 option18+37+17+38): Off
  Client access-line-id insert type            : -
  Client access-line-id parse mode             : -
  Agent-circuit-Id transfer mode               : -
  Agent-remote-Id transfer  mode               : -
  Client access-line-id include                : -,-,separator:no
  Client access-line-id DSLAM identify         : -
  DHCP broadcast                               : Off
  DHCP proxy                                   : On
  DHCP shortlease                              : Off
  DHCP forcerenew retransmit-interval          : -
  DHCP forcerenew retransmit-times             : -
  DHCP filter-policy acl                       : -
  PPP filter-policy acl                        : -
  IP trigger                                   : Off
  IPv6 trigger                                 : Off
  ARP trigger                                  : Off
  ND trigger                                   : Off
  Vpn Instance                                 :
  802.1p-To-Vpn                                : Off
  ND proxy                                     : Off
  Multicast control (session/vlan)             : Off/Off
  ARP proxy                                    : Off
  User detect interval                         : 30
  User detect retransmit times                 : 5
  User detect no-datacheck                     : 0
  Access-delay type                            : LoadBalanceGroup-Based Access-Delay
  Load-balance algorithm enhance(PPP)          : Enable
  Update frequency                             : 100
  Increased user                               : -23
  Selected interface                           : True
  Base load-balance group                      : 5
  Access-delay load-balance group name         : te
  Dot1x authentication trigger                 : Off
  Wlan option82 decode-mode ap-mac             : -
  Wlan option82 decode-mode ssid               : -
  IPoE service type                            : -
  Manager state                                : Active
  Block PE VLAN/CE VLAN                        : -/-
  Access limit                                 : 65536
  Access limit IPoE                            : 65536
  Access limit PPPoE                           : 65536
  Access limit PVC                             : -
  Access limit PE VLAN/CE VLAN                 : -/-
  Access number                                : 0
  Qos-profile inbound                          :
  Qos-profile outbound                         :
  Trust 8021p protocol                         : Off
  Configured vlan number                       : 0
  NAS-Port-Id                                  : slot=2;subslot=0;port=1;vlanid=--;vlanid2=--;
  NAS logic port                               : -
  NAS logic sysname                            : -
  NAS logic IP                                 : -
  VBAS MAC address                             : -
  VBAS authentication mode                     : -
  Client PPPoE option0x105 mapping interface   : -
  Default user name template                   : -
  Default password template                    : -
  Service identify policy                      : -
  Wlan switch                                  : Off
  Wlan ssid                                    : Off
  Ssid                                         : -
  Link-account resolve                         : Off
  IPv6 ND RA unicast                           : Off
  DHCP trust broadcast flag                    : Off
  Calling-number-avp cevlan-offset             : -
  Session-group template                       : -
  DHCP lease-proxy type                        : -
  DHCP lease-proxy                             : -
  DHCP lease-proxy first step                  : -
  DHCP lease-proxy second step                 : -
  DHCP lease-proxy renew-packet through-time   : -
  Option82 rebuild version3                    : Off
  Option82 rebuild self define                 : Off
  Option82 rebuild version4                    : Off
  Option37-relay-mode                          : all-value
  DHCPv6 lease-proxy preferred-lifetime        : -
  DHCPv6 lease-proxy valid-lifetime            : -
  DHCPv6 lease-proxy user-detect               : -

# Display brief information about all BAS interfaces.

<HUAWEI> display bas-interface
---------------------------------------------------------------------------
   Interface                BASIF-access-type       config-state   access-number
  ---------------------------------------------------------------------------
   Eth-Trunk0               Layer2-subscriber       Updated        0
   Eth-Trunk0.1             Layer2-subscriber       Updated        1
   Eth-Trunk0.1234          Layer2-subscriber       Updated        0
  ----------------------------------------------------------------------
  Total 3 BASIF is configured

# Display detailed information about BAS interface GigabitEthernet 0/1/9.

<HUAWEI> display bas-interface GigabitEthernet 0/1/9
  Access type                            : Layer2-subscriber
  BASIF state                            : Updated
  BASIF name                             : GigabitEthernet0/1/9
  Pre-authentication default domain      : default0
  Authentication default domain          : default1
  Replace authentication domain forcibly : None
  Roam domain                            : default1
  Permit domain                          : -                          
  Deny domain                            : -
  Permit domain list                     : -
  Deny domain list                       : - 
  Accounting copy RADIUS server          : -
  Authentication method                  : [ppp]
  IPV6 Authentication method             : [ppp]
  Nas port type                          : ethernet (15)
  Client-id(DHCPv4 option61) hardware-type: -
  Vendor-class(DHCPv4 option60/DHCPv6 option 16): Off
  DHCPv6 vendor-Class code               : 16
  DHCPv6 vendor-Class offset             : 0
  Client option82                        : Off
  Client access-line-id(DHCPv4 option82/DHCPv6 option18+37+17+38) : Off
  Client access-line-id insert type      : -
  Client access-line-id parse mode       : -
  Agent-circuit-Id transfer mode         : -
  Agent-remote-Id transfer  mode         : -
  Client access-line-id include          : -,-,separator:-
  Client access-line-id DSLAM identify   : -
  Access-line-id update online           : On
  DHCP broadcast                         : Off
  DHCP proxy                             : on    
  DHCP shortlease                        : off
  DHCP forcerenew retransmit interval    : -
  DHCP forcerenew retransmit times       : -
  DHCP filter policy acl                 : -
  PPP filter-policy acl                  : -
  IP trigger                             : Off
  IPv6 trigger                           : Off
  ARP trigger                            : Off
  ND trigger                             : Off   
  Vpn Instance                           :
  802.1p to vpn                          : Off 
  ND proxy                               : Off
  Multicast control( session/vlan)       :off/off
  ARP proxy                              : Off
  User detect interval                   : 30
  User detect retransmit times           : 5
  User detect no-datacheck               : 0
  Access-delay type                      : Disable
    Dot1x authentication trigger           : Off
  Wlan option82 decode-mode ap-mac       : -
  Wlan option82 decode-mode ssid         : -
  User-identify-policy:option79(no-exist-action:offline)
  Manager state                          : Active
  Block PE VLAN/CE VLAN                  : -/-
  Access limit                           : 65536
  Access limit PVC                       : -
  Access limit PE VLAN/CE VLAN              : -/-
 Access limit PE VLAN/CE VLAN IPOE            : -/<2,->:2   
  Access limit PE VLAN/CE VLAN IPOEV4          : -/<2,->:2
  Access limit PE VLAN/CE VLAN IPOEV6          : -/<2,->:2
  Access limit PE VLAN/CE VLAN PPPOE           : -/<5,->:4  
  Access number                          : 0
  Qos-profile inbound                    :
  Qos-profile outbound                   :
  Trust 8021p protocol                   : Off
  Configured vlan number                 : 0
  NAS-Port-Id                            : slot=2;subslot=0;port=1;vlanid=--;vlanid2=--;                                             
  NAS logic port                         : -
  NAS logic sysname                      : -
  NAS logic IP                           : -
  VBAS MAC address                       : -
  VBAS authentication mode               : -
  Client PPPoE option0x105 mapping interface: -
  Default user name template             : -
  Default password template              : -
  Service identify policy                : -
  Wlan switch                            : Off
  Wlan ssid                              : Off
  Ssid                                   : -
  Link-account resolve                   : Off
  IPv6 ND RA unicast                     : Off
  DHCP trust broadcast flag              : Off
  Calling-number-avp cevlan-offset       : -
  Session-group template                  : -
  DHCP lease-proxy type                   : Fixed
  DHCP lease-proxy                        : 600
  DHCP lease-proxy first step             : 0
  DHCP lease-proxy second step            : 0
  DHCP lease-proxy renew-packet through-time   : 0
  Option82 rebuild version3                    : Off
  Option82 rebuild self define                 : Off
  Option82 rebuild version4                    : Off
  Option37-relay-mode      : all-value
  DHCPv6 lease-proxy preferred-lifetime        : -
  DHCPv6 lease-proxy valid-lifetime            : -
  DHCPv6 lease-proxy user-detect               : -

# Display detailed information about BAS interface GigabitEthernet 0/1/0.

<HUAWEI> display bas-interface GigabitEthernet 0/1/0
  Access type                                  : Layer3-leased-line                                                                 
  BASIF state                                  : Updated                                                                            
  BASIF name                                   : GigabitEthernet0/1/0                                                             
  Authentication default domain                : default1                                                                           
  Accounting copy RADIUS server                : -                                                                                  
  Nas port type                                : ethernet (15)                                                                      
  Leased-line user name                        :                                                                                    
  Leased-line user password                    : ******                                                                             
  Qos-profile inbound                          :                                                                                    
  Qos-profile outbound                         :                                                                                    
  Configured vlan number                       : 0                                                                                  
  Wlan option82 decode-mode ap-mac             : -                                                                                  
  Wlan option82 decode-mode ssid               : -                                                                                  
  NAS-Port-Id                                  : slot=0;subslot=3;port=0;vlanid=--;vlanid2=--;                                      
  Leased-line user name template               : On                                                                                 
  User mac                                     : -                                                                                  
  Client access-line-id(DHCPv4 option82/DHCPv6 option18+37+17+38): Off                                                              
  Client access-line-id insert type            : -                                                                                  
  Client access-line-id mapping interface      : -                                                                                  
  Link-account resolve                         : Off                                                                                
  Default user name template                   : -                                                                                  
  DHCP lease-proxy type                        : -                                                                                  
  DHCP lease-proxy                             : -                                                                                  
  DHCP lease-proxy first step                  : -                                                                                  
  DHCP lease-proxy second step                 : -                                                                                  
  DHCP lease-proxy renew-packet through-time   : -                                                                                  
  Option82 rebuild version3                    : Off                                                                                
  Option82 rebuild self define                 : Off                                                                                
  Option82 rebuild version4                    : Off                                                                                
  Option37-relay-mode                          : all-value

**Table 1** Description of the **display bas-interface** command output
Item	Description
access-number	Number of access users.
Interface	Name of the BAS interface, including the interface type and number.
Access type	Access type of the BAS interface.
Access limit	Number of users that can access the BAS interface.
Access limit PVC	Number of users that can access the BAS interface based on the PVC value. A hyphen (-) is displayed if no access limit is configured on the BAS interface. vpi/vc: access-limit-number is displayed repeatedly with a comma (,) separated if access limit is configured.
Access number	Indicates the number of users on the BAS interface.
Access limit PE VLAN/CE VLAN	Outer/inner VLAN value configured on the BAS interface to limit the number of access users based on PVCs. A hyphen (-) is displayed if no access limit is configured on the BAS interface. If a VLAN user is blocked, VLAN ID:access-limit-number is displayed. If a segment of VLAN users is blocked, the start VLAN ID-the end VLAN ID:access-limit-number is displayed. Two independent parts of blocked VLAN IDs are separated by a comma (,).
Access limit PE VLAN/CE VLAN IPOE	Maximum number of IPoE users allowed in a VLAN.
Access limit PE VLAN/CE VLAN IPOEV4	Maximum number of IPoEv4 users allowed in a VLAN.
Access limit PE VLAN/CE VLAN IPOEV6	Maximum number of IPoEv6 users allowed in a VLAN.
Access limit PE VLAN/CE VLAN PPPOE	Maximum number of PPPoE users allowed in a VLAN.
Access limit IPoE	Maximum number of IPoE access users.
Access limit PPPoE	Maximum number of PPPoE access users.
BASIF state	Configuration status of the BAS interface.
BASIF name	Description file of the BAS interface.
Pre-authentication default domain	Default pre-authentication domain configured on the BAS interface.
Authentication default domain	Indicates the default authentication domain configured on the BAS interface.
Authentication method	Authentication type of the BAS interface.
Replace authentication domain forcibly	Forcible replace authentication domain configured on the BAS interface.
Roam domain	Roaming domain configured on the BAS interface.
Permit domain	Domains from which users are allowed to access. A hyphen (-) is displayed if no such a domain is configured. Specified domain names, each two of which are separated by a comma, are displayed.
Permit domain list	List of domains from which users are allowed to access. A hyphen (-) is displayed if no such a domain list is configured. A specified domain list name is displayed if it is configured.
Deny domain	Domains from which users are not allowed to access. A hyphen (-) is displayed if no such a domain is configured. Specified domain names, each two of which are separated by a comma, are displayed.
Deny domain list	List of domains from which users are not allowed to access. A hyphen (-) is displayed if no such a domain list is configured. A specified domain list name is displayed if it is configured.
Accounting copy RADIUS server	RADIUS server to which the accounting information is copied.
IPV6 Authentication method	IPv6 authentication type of the BAS interface.
Nas port type	Link-layer protocol of the BAS interface.
Client-id(DHCPv4 option61) hardware-type	Hardware type of DHCP Option 61 configured on the BAS interface (The default value is 1. The value can be set to 0.) The hardware type is configured using the option-61 command.
Vendor-class(DHCPv4 option60/DHCPv6 option 16)	Whether the BAS interface trusts the vendor-class (DHCPv4 option60/DHCPv6 option 16) attribute of DHCP/DHCPv6 packets sent from the client of BAS interface. On: The BAS interface trusts the vendor-class (DHCPv4 option60/DHCPv6 option 16) attribute. Off: The BAS interface does not trust the vendor-class (DHCPv4 option60/DHCPv6 option 16) attribute.
DHCPv6 vendor-Class code	Option code of the DHCPv6 vendor-class attribute configured on the BAS interface (The default value is option 16. The option code can be set to other values.).
DHCPv6 vendor-Class offset	Offset value of the DHCPv6 vendor-class attribute configured on the BAS interface (The default offset value is 0. It is an integer ranging from 1 to 254.).
DHCPv6 lease-proxy preferred-lifetime	Preferred lifecycle of DHCPv6 lease proxy, which is expressed in seconds. This parameter is specified using the dhcpv6 lease-proxy command. If this parameter is not specified, "-" is displayed.
DHCPv6 lease-proxy valid-lifetime	Valid lifecycle of DHCPv6 lease proxy, which is expressed in seconds. This parameter is specified using the dhcpv6 lease-proxy command. If this parameter is not specified, "-" is displayed.
DHCPv6 lease-proxy user-detect	Whether ND probing of DHCPv6 lease proxy users is enabled. Off: Disabled. On: Enabled. This parameter is specified using the dhcpv6 lease-proxy command. If this parameter is not specified, "-" is displayed.
Client option82	Whether the BAS interface trusts Option 82 of the client. On: The BAS interface trusts Option 82 of the client. Off: The BAS interface does not trust Option 82 of the client.
Client access-line-id(DHCPv4 option82/DHCPv6 option18+37+17+38)	Whether the BAS interface of the ME device trusts DHCP/DHCPv6 packets with the access-line-id (DHCPv4 option82/DHCPv6 option 18+37+17) field sent from the client. On: The BAS interface trusts the access-line-id (DHCPv4 option82/DHCPv6 option 18+37+17) attribute. Off: The BAS interface does not trust the access-line-id (DHCPv4 option82/DHCPv6 option 18+37+17) attribute.
Client access-line-id insert type	BAS interface information format inserted to the access-line-id (DHCPv4 option82/DHCPv6 option 18+37+17) field of DHCP/DHCPv6 packets. A hyphen (-) is displayed if the inserted information format is not configured on the BAS interface. A specified format string is displayed if it is configured.
Client access-line-id parse mode	Parse mode for the access-line-id (DHCPv4 option82/DHCPv6 option 18+37+17/ PPPoE 0x105 /VBAS) field of DHCP/DHCPv6 packets on the BAS interface. A hyphen (-) is displayed if the parsing mode is not configured on the BAS interface. A specified format string is displayed if it is configured.
Client access-line-id include	access-line-id (DHCPv4 option82/DHCPv6 option 18+37+17/ PPPoE 0x105 /VBAS) field contained in the RADIUS attribute configured on the BAS interface (This information affects attributes of Calling-Station-Id, NAS-Port-Id, and BB-Caller-Id.).
Client access-line-id DSLAM identify	Using the access-line-id(DHCPv4 option82/DHCPv6 option 18+37+17/ PPPoE 0x105 /VBAS) field of the DSLAM to pad the agent-circuit-id and agent-remote-id attributes on the BAS interface. A hyphen (-) is displayed if padding the attributes with the access-line-id field is not configured on the BAS interface. A specified format string is displayed if padding the attributes with the access-line-id field is configured on the BAS interface.
Client PPPoE option0x105 mapping interface	Interface information, which is configured on the BAS interface and is used to map the PPPoE option 105 information. A hyphen (-) is displayed if such interface information is not configured. The interface name is displayed if such interface information is configured.
Client access-line-id mapping interface	Client access-line-id mapping interface.
Agent-circuit-Id transfer mode	Transfer mode for the agent-circuit-id (DHCPv4 option82 sub-option1/DHCPv6option 18/PPPoE 0x105 sub-option1/VBAS sub-option1) field of DHCP/DHCPv6 packets configured on the BAS interface (The actual configured format is displayed. The default format is string. The transfer mode can be set to hex.).
Agent-remote-Id transfer mode	Transferring mode for the agent-remote-id (DHCPv4 option82 sub-option2/DHCPv6 option 17/PPPoE Ox105 sub-option2/VBAS sub-option2) attribute of DHCP/DHCPv6 packets configured on the BAS interface (The default format is string. The transfer mode can be set to hex.).
DHCP broadcast	Whether to enable DHCP packet broadcast. On: DHCP packet broadcast is enabled. Off: DHCP packet broadcast is disabled.
DHCP proxy	Whether DHCP proxy is enabled on the BAS interface. On: DHCP proxy is enabled on the BAS interface. Off: DHCP proxy is not enabled on the BAS interface.
DHCP shortlease	Short lease configured on the BAS interface. Off: Short lease is not enabled on the BAS interface. A specified short lease (in seconds) is displayed when it is enabled on the BAS interface.
DHCP forcerenew retransmit interval	Interval at which DHCP forcerenew packets are retransmitted. A hyphen (-) is displayed when DHCP forcerenew retransmit interval is not configured. A specified interval (in seconds) is displayed when DHCP forcerenew retransmit interval is configured.
DHCP forcerenew retransmit times	Times that DHCP forcerenew packets are retransmitted on the BAS interface. A hyphen (-) is displayed if no DHCP forcerenew packet is retransmitted. Specified retransmitted times are displayed if DHCP forcerenew packets are transmitted.
DHCP filter policy acl	DHCP filter-policy ACL number configured on the BAS interface. The value ranges from 4000 to 4999. A hyphen (-) is displayed if no DHCP filter-policy ACL number is configured. A specified ACL number is displayed if it is configured.
DHCP trust broadcast flag	Whether the device is enabled to use the broadcast flag value in a DHCP request packet to determine the destination MAC address type for a DHCP response packet. On: The device is enabled to use the broadcast flag value in a DHCP request packet to determine the destination MAC address type for a DHCP response packet. Off: The device is not allowed to use the broadcast flag value in a DHCP request packet to determine the destination MAC address type for a DHCP response packet.
DHCP lease-proxy type	DHCP lease proxy type.
DHCP lease-proxy	DHCP proxy lease.
DHCP lease-proxy first step	DHCP first-step proxy lease.
DHCP lease-proxy second step	DHCP second-step proxy lease.
DHCP lease-proxy renew-packet through-time	Number of times that lease proxy users send lease renewal packets to the DHCP server before the original T1/T2 leases arrive.
PPP filter-policy acl	PPP filter-policy ACL number configured on the BAS interface.
IP trigger	Whether the access request is triggered by the first IPv4 packet sent by the user. On: The access request is triggered by the first IPv4 packet sent by the user. Off: The access request is not triggered by the first IPv4 packet sent by the user.
IPv6 trigger	Whether the access request is triggered by the first IPv6 packet sent by the user. On: The access request is triggered by the first IPv6 packet sent by the user. Off: The access request is not triggered by the first IPv6 packet sent by the user.
IPv6 ND RA unicast	Whether the device is enabled to send RA packets that carry unicast destination IP addresses. On: The device is enabled to send RA packets that carry unicast destination IP addresses. Off: The device is not allowed to send RA packets that carry unicast destination IP addresses. Instead, the device sends RA packets that carry broadcast destination IP addresses.
ARP trigger	Whether the access request is triggered by the ARP packet sent by the user. On: The access request is triggered by the ARP packet sent by the user. Off: The access request is not triggered by the ARP packet sent by the user.
ARP proxy	Whether proxy ARP is enabled. On: Proxy ARP is enabled. Off: Proxy ARP is disabled.
ND trigger	Whether ND trigger is enabled on the BAS interface. On: ND trigger is enabled on the BAS interface. Off: ND trigger is not enabled on the BAS interface.
ND proxy	Whether proxy ND is enabled. On: Proxy ND is enabled. Off: Proxy ND is disabled.
Vpn Instance	Indicates the VPN instance that the BAS interface belongs to.
Instance	Instance.
Multicast control (session/vlan)	Multicast control (session/vlan).
User detect interval	Interval for checking whether a user is online.
User detect retransmit times	Number of online detection failures allowed by the .
User mac	Mac address.
Access-delay type	Access delay policy on the interface. The values are as follows: Circuit-ID-Based Access-Delay: The device applies the access delay policy based on Option 82 or PPPoE+ information. Mac-Based Access-Delay: The device applies the access delay policy based on the MAC address of the user. Unconditional Access-Delay: The device applies the access delay policy to all the users that log in to the device through the interface. Disable: The access delay function is disabled.
Load-balance algorithm enhance(PPP)	Whether the enhanced load balancing algorithm is enabled: Enable: The algorithm is enabled. Disable: The algorithm is disabled.
Update frequency	Threshold specifying the change in the number of users, which when reached, triggers the system to reselect the preferred user access interface in a load balancing group. The default value is 1.
Increased user	Change in the number of users after the system reselects the interface with the smallest number of users in a load balancing group. If the number of users increases, a positive number is displayed in the field. If the number of users decreases, a negative number is displayed in the field. A zero is displayed in this field if the enhanced load balancing algorithm is disabled.
Selected interface	Whether an interface is selected as the interface with the smallest number of users in a load balancing group: True: The interface is selected as the interface with the smallest number of users in a load balancing group. False: The interface is not selected as the interface with the smallest number of users in a load balancing group.
Dot1x authentication trigger	Whether the access request is triggered by the first 802.1x authentication packet sent by the user. On: The access request is triggered by the first 802.1x authentication packet sent by the user. Off: The access request is not triggered by the first 802.1x authentication packet sent by the user.
Wlan option82 decode-mode ap-mac	Parsing of the AP MAC address in the Option 82 field.
Wlan option82 decode-mode ssid	Parsing of the SSID in the Option 82 field.
Wlan switch	Whether wlan-switch is enabled on the BAS interface. On: wlan-switch is enabled. Off: wlan-switch is not enabled.
Wlan ssid	Whether wlan-ssid is enabled on the BAS interface. On: wlan-ssid is enabled. Off: wlan-ssid is not enabled.
IPoE service type	IPoE access type.
Manager state	Status of the BAS interface The values are as follows: Active: The BAS interface is active. Block: The BAS interface is blocked. Users cannot access a blocked BAS interface.
Block PE VLAN/CE VLAN	Configuration information of the BAS interface that blocks QinQ users based on VLANs. - /- is displayed if the BAS interface is not configured to block QinQ users based on VLANs. <Start inner VLAN, end inner VLAN>/Outer VLAN is displayed if the BAS interface blocks QinQ users based on inner VLANs.
Qos-profile inbound	Indicates the name of the QoS profile on uplink packets applied to the BAS interface.
Qos-profile outbound	Indicates the name of the QoS profile on downlink packets applied to the BAS interface.
Trust 8021p protocol	Whether the BAS interface trusts the 802.1p value carried in the user packet. On: Trust 8021p protocol is enabled on the BAS interface. Off: Trust 8021p protocol is not enabled on the BAS interface.
Configured vlan number	Indicates the number of VLANs configured on the BAS interface.
NAS-Port-Id	Indicates the NAS-Port-ID attribute of the BAS interface.
NAS logic port	Logical interface configured on the BAS interface. A hyphen (-) is displayed if no logical interface is configured. A specified logical interface name is displayed if it is configured.
NAS logic sysname	Logical host name of the BAS interface. A hyphen (-) is displayed if no logical system name is configured. A specified logical system name is displayed if it is configured.
NAS logic IP	Logical IP address of the BAS interface. A hyphen (-) is displayed if no logical IP address is configured. A specified logical IP address is displayed if it is configured.
VBAS MAC address	MAC address configured after VBAS is enabled on the BAS interface. A hyphen (-) is displayed if VBAS is not enabled on the BAS interface. A specified MAC address is displayed if VBAS is enabled on the BAS interface.
VBAS authentication mode	Authentication mode that the device processes user connection requests when the access device does not report the physical location using the VBAS protocol after VBAS is enabled on the BAS interface. A hyphen (-) is displayed if VBAS is not enabled on the BAS interface. A specified authentication mode is displayed if VBAS is enabled on the BAS interface. The default authentication mode is reject. The authentication mode can be set to ignore.
Default user name template	IPoX pure user name template bound to the BAS interface. A hyphen (-) is displayed if no IPoX pure user name template is configured. A specified IPoX pure user name template is displayed if it is configured.
Default password template	IPoX user password template bound to the BAS interface. A hyphen (-) is displayed if no IPoX user password template is configured. A specified IPoX user password template is displayed if it is configured.
Service identify policy	Name of the policy template used to identify services bound to the BAS interface. A hyphen (-) is displayed if no policy template name is not configured to identify services. A specified policy template name is displayed if it is configured to identify services.
Ssid	SSID configured on the BAS interface. A hyphen (-) is displayed if no SSID is configured. A specified SSID is displayed if it is configured.
Link-account resolve	Whether to allow an accounting request packet that the device sends to an RADIUS server to carry the link-account information: On: An accounting request packet that the device sends to an RADIUS server is allowed to carry the link-account information. Off: An accounting request packet that the device sends to an RADIUS server is not allowed to carry the link-account information.
Calling-number-avp cevlan-offset	Offset of the CE-VLAN ID in the calling-number attribute on the LAC for L2TP access.
Session-group template	Session-group template bound to the BAS interface. If no session-group template bound to the BAS interface, this field is not displayed.
Option82 rebuild version3	Whether the device is enabled to encapsulate the Option 82 attribute into messages to be sent to the DHCP server in version 3 format: On: The function is enabled. Off: The function is disabled.
Option82 rebuild self define	Whether the device is enabled to encapsulate the Option 82 attribute into messages to be sent to the DHCP server in a self-defined format: On: The function is enabled. Off: The function is disabled.
Option82 rebuild version4	Whether the device is enabled to encapsulate the Option 82 attribute into messages to be sent to the DHCP server in version 4 format: On: The function is enabled. Off: The function is disabled.
Option37-relay-mode	Enterprise number removed from a DHCPv6 Solicit or Request message.
BASIF-access-type	Access type of the BAS interface.
config-state	Configuration status of the BAS interface.
Access-line-id update online	Enable a device to update the Option 82 information of an online user. This field is displayed only in Layer 2 common user and leased line user access scenarios.
802.1p to vpn	Whether 802.1p flexible access to vpn is enabled on the BAS interface. On: 802.1p flexible access to VPN is enabled on the BAS interface. Off: 802.1p flexible access to VPN is not enabled on the BAS interface.
Leased-line user name template	Whether a user name template is used to generate a user name for a leased line user: Off is displayed when it is not used. The template name is displayed when it is used.
Leased-line user name	Leased line user name.
Leased-line user password	Leased-line user password.
User-identify-policy	Method for obtaining MAC addresses of Layer 3 DHCPv6 users during login, configured using the dhcpv6 user-identify-policy command: option79-option38: The sequence for obtaining user's MAC addresses is Option 79, Option 38, and DUID. option79-option38: The sequence for obtaining user's MAC addresses is Option 38, Option 79, and DUID. option79: The sequence for obtaining users' MAC addresses is Option 79 and DUID. option38: The sequence for obtaining users' MAC addresses is Option 38 and DUID. If offline is displayed in the no-exist-action field, the device cannot obtain users' MAC addresses from DUIDs. If online is displayed in the no-exist-action field, the device can obtain users' MAC addresses from DUIDs.