The display cpu-defend hostcar config slot command displays the default and actual CAR parameter values of the user-side packets sent to the CPU on a specified board, or the default and actual CAR parameter values of the user-side packets with the same VLAN ID sent to the CPU on a specified board.
This command is supported only on the NetEngine 8000 F1A.
Parameter | Description | Value |
---|---|---|
hostcar |
Displays the default and actual CAR parameter values of the user-side packets sent to the CPU. |
- |
vlan-host-car |
Displays the default and actual CAR parameter values of the user-side packets with the same VLAN ID sent to the CPU. |
- |
http-hostcar |
Displays the default and actual CAR parameter values of the user-side web packets sent to the CPU. |
- |
slotid |
Specifies the slot number. |
- |
Usage Scenario
The display cpu-defend hostcar command is used to display the default and actual CAR parameter values of the user-side packets sent to the CPU on a specified board, or the default and actual CAR parameter values of the user-side packets with the same VLAN ID sent to the CPU on a specified board.
Precautions
In VS mode, this command is supported only by the admin VS.
The actual command output varies according to the device. The command output here is only an example.
<HUAWEI> display cpu-defend hostcar config slot 1 Slot : 1 CarType : Hostcar Default Cir : 64 kbps Cbs : 65536 bytes Pir : NA Pbs : NA Drop-rate :enable Logging interval : 5 minute(s) Logging discard-threshold : 30000 byte(s) Actual Cir : 30 kbps Cbs : 3600 bytes Pir : NA Pbs : NA Drop-rate :enable Logging interval : 5 minute(s) Logging discard-threshold : 30000 byte(s)
Item | Description |
---|---|
slot | Slot Number. |
CarType | CAR type:
|
Cir | Committed information rate. |
Cbs | Committed burst size. |
Pir | Peak information rate. |
Pbs | Peak burst size. |
Drop-rate | Whether Auto Bandwidth Adjustment is enabled or not. |
Logging interval | Interval at which the device counts the number of bytes of discarded CPU-destined packets. |
Logging discard-threshold | Log threshold for the number of the discarded bytes. |