display cu-mode interface

Function

The display cu-mode interface command displays information about the interface with the cu-mode command configuration.

This command is supported only on the NetEngine 8000 F1A.

Format

display cu-mode interface

Parameters

None

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
bras-control	read

Usage Guidelines

Usage Scenario

In CP and UP separation scenarios, to view interfaces with the cu-mode command configuration, run the display cu-mode interface command.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display information about interfaces with the cu-mode command configuration.

<HUAWEI> display cu-mode interface
------------------------------------------------------------------------
Interface                                                    Type
------------------------------------------------------------------------
GigabitEthernet0/1/8      cu-mode
GigabitEthernet0/1/16      cu-mode
GigabitEthernet0/1/24      cu-mode
------------------------------------------------------------------------
Total 3 CUMODEIF is configured

**Table 1** Description of the **display cu-mode interface** command output
Item	Description
cu-mode	cu mode.