display flexe group information
Function
The display flexe group information command displays information about a FlexE group, the bound FlexE physical interfaces and the remaining FlexE physical interfaces that can be bound in the FlexE group, physical interfaces added to the FlexE group, and timeslot allocation on a subcard.
This command is supported only on the NetEngine 8000 F2A.
Usage Guidelines
Usage Scenario
To check information about FlexE groups on a FlexE subcard, the bound FlexE physical interfaces and the remaining FlexE physical interfaces that can be bound in the group, information about the FlexE physical interfaces added to each group, and timeslot allocation in each group, run the display flexe group information command.
Example
The actual command output varies according to the device. The command output here is only an example.
<HUAWEI> display flexe group information slot 1 card 1 FlexE Card Info: ============================================================= FlexE Config Mode : Bandwidth ============================================================= FlexE Group Info: ============================================================= GroupID Total Bandwidth(M) Valid Bandwidth(M) ------------------------------------------------------ 1 50000 50000 ============================================================= FlexE Group Binding Interfaces Capability: ============================================================= ------------------------------------------------------------- GroupID Interfaces already bound Interfaces can be bound ------------------------------------------------------------- 1 FlexE-50G0/1/52 ------------------------------------------------------------- ============================================================= FlexE Phy Info: ============================================================= Port No : FlexE-50G0/1/52 Active Status : 1 Cfg Group ID : 1 Cfg Group No : 1 Real TX Group No : 1 Real RX Group No : 1 Remote Group No : 1 Cfg Phy No : 2 Real TX Phy No : 2 Real RX Phy No : 2 Remote Phy No : 2 ============================================================= FlexE Time Slot Info: ============================================================= port-no : FlexE-50G0/1/52 ts-num : 10 sub-ts-num : 5 ------------------------------------------------------- time-slot-id ts-port-map ------------------------------------------------------- 0: [129][129][-][-][-] 1: [-][-][-][-][-] 2: [-][-][-][-][-] 3: [-][-][-][-][-] 4: [-][-][-][-][-] 5: [-][-][-][-][-] 6: [-][-][-][-][-] 7: [-][-][-][-][-] 8: [-][-][-][-][-] 9: [-][-][-][-][-] =============================================================
| Item | Description |
|---|---|
| FlexE Card Info | Current configuration mode of the FlexE subcard. |
| FlexE Group Info | FlexE group information. |
| FlexE Phy Info | Information about the FlexE physical interfaces added to the FlexE group. |
| FlexE Time Slot Info | Timeslot allocation to FlexE logical interfaces. |
| FlexE Config Mode | Indicates whether the bandwidth mode or timeslot mode is used. |
| FlexE Group Binding Interfaces Capability | List of FlexE physical interfaces that can be bound to the FlexE group. |
| Port No | Port number. |
| Active Status | Active status. |
| Cfg Group ID | Indicates the FlexE group to which a FlexE physical interface is joined. |
| Cfg Group No | The group number of the FlexE physical interface. |
| Cfg Phy No | The phy number of FlexE physical interface. |
| Real TX Group No | The number of the group that is actually sent by a FlexE physical interface. |
| Real TX Phy No | The phy number actually transmitted by a FlexE physical interface. |
| Real RX Group No | The group number of the FlexE physical interface actually receives. |
| Real RX Phy No | The phy number actually received by a FlexE physical interface. |
| Remote Group No | The group number information of remote FlexE physical interface. |
| Remote Phy No | The phy number of the remote FlexE physical interface. |