display l2tp tunnel rui
Function
The display l2tp tunnel rui command displays L2TP tunnel backup information.
This command is supported only on the NetEngine 8000 F1A.
Parameters
| Parameter | Description | Value |
|---|---|---|
| tunnel-item tunnel-item |
Displays information about an L2TP tunnel with a specified ID. |
The value of the local ID for an L2TP tunnel ranges from 1 to 65535. |
| tunnel-name remote-name |
Displays L2TP information with a specific remote name. |
- |
| remote-backup-profile rbp-name |
Displays information about an L2TP tunnel associated with a specified RBP. |
The value is a string of 1 to 128 characters. |
| remote-backup-service rbs-name |
Displays information about an L2TP tunnel associated with a specified RBS. |
The value is a string of 1 to 32 case-insensitive characters, spaces not supported. |
| rui |
Displays L2TP tunnel backup information. |
- |
Usage Guidelines
Usage Scenario
The display l2tp tunnel rui command is used to display L2TP tunnel backup information, including backup parameters in brief or details in the L2TP dual-system hot backup scenario. Dual-system hot backup parameters of L2TP tunnels that are not backed up will not be displayed.If the L2TP users who go online from multiple sub-interfaces are on the same tunnel, this tunnel has the RUI attribute so long as one of the L2TP users is a RUI user and the hot standby-related parameters are displayed in the command output.
Precautions
In VS mode, this command is supported only by the admin VS.
Example
The actual command output varies according to the device. The command output here is only an example.
<HUAWEI> display l2tp tunnel rui
LTID: local assigned tunnel ID, RTID:Remote assigned tunnel ID, RA:Remote Ip address, RN: Remote Name, RG: Register(L:local,R:remote)
Basic Info Redundant info
------------------------------------------------------------------------------
LTID RTID RA RN Sessions RG state Life(s)
------------------------------------------------------------------------------
7 86 3.3.3.3 HUA-241 1 L active 14s
------------------------------------------------------------------------------
Total 1, printed 1
| Item | Description |
|---|---|
| Remote Name | Remote name. |
| LTID | Local tunnel ID. |
| RTID | Remote tunnel ID. |
| RA | Remote IP address. |
| Sessions | Specifies the number of sessions, including the sessions that are already online and the sessions that are going online. |
| RG | Flag indicating whether a tunnel is generated on the local or remote end, no RUI tunnel show --. |
| state | Tunnel status, active or inactive, no RUI tunnel show --. |
| Life(s) | Tunnel lifetime, in seconds. |