display remote-backup-profile

Function

The display remote-backup-profile command displays the configuration and status information of a remote backup profile (RBP).

This command is supported only on the NetEngine 8000 F1A.

Format

display remote-backup-profile { slot slot-number } [ profile-name ]

Parameters

Parameter	Description	Value
slot slot-number	Specifies a slot ID.	-
profile-name	Specifies the name of an RBP.	The value is a string of 1 to 128 characters.

Parameter

Description

Value

slot slot-number

Specifies a slot ID.

profile-name

Specifies the name of an RBP.

The value is a string of 1 to 128 characters.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
rui	debug

Usage Guidelines

Usage Scenario

To view the configuration and status information of an RBP, run the display remote-backup-profile command.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display the configuration and status information of RBPs named test and on the board in slot 1.

<HUAWEI> display remote-backup-profile slot 1 test
-----------------------------------------------
Profile-Index : 0x1001
Profile-Name : test
Service : bras multicast l2tp 
track protocol : VRRP
VRRP-ID : 2
VRRP-Interface : Eth-Trunk10.2
Access-Control : Odd-Mac
State : Slave
Peer State : --
Interface : 
            Eth-Trunk10.6
Forwarding Configured: Slave Without-forwarding
Forwarding RunState : Slave Without-forwarding
Backup mode : hot
Last time start update user AIB : --
Last time end update user AIB : --
DHCP user IGMP copy : disable

# Display the configuration and status information of RBPs on the board in slot 1.

<HUAWEI> display remote-backup-profile slot 1
----------REMOTE-BACKUP-PROFILE----------                                                                                          
         PROFILE-ID  PROFILE-NAME                                                                                                   
 -----------------------------------------                                                                                          
         0x1000       p1                                                                                                            
         0x1004       abc                                                                                                           
         0x1006       test                                                                                                          
         0x1008       teset                                                                                                         
         0x1009       xx                                                                                                            
         0x100a       slaot                                                                                                         
         0x100d       1                                                                                                             
 -----------------------------------------                                                                                          
  Total 7  printed.

**Table 1** Description of the **display remote-backup-profile** command output
Item	Description
Profile-Index	RBP index.
Profile-Name	RBP name.
Service	Service type.
track protocol	Type of the tracked protocol.
VRRP-ID	VRRP ID.
VRRP-Interface	Interface with VRRP bound.
Access-Control	User access mode.
State	RBP state.
Peer State	Peer status.
Interface	Interface bound to the RBP.
Forwarding Configured	Forwarding configurations.
Forwarding RunState	Actual forwarding status.
Backup mode	Backup mode.
Last time start update user AIB	Start time when the user AIB was updated.
Last time end update user AIB	End time when the user AIB was updated.
DHCP user IGMP copy	Whether multicast is enabled.