display multicast-list

Function

The display multicast-list command displays information about the specified multicast list, or all the multicast lists.

This command is supported only on the NetEngine 8000 F1A.

Format

display multicast-list [ ipv6 ] [ list-name ]

Parameters

Parameter	Description	Value
ipv6	Indicates an IPv6 multicast profile.	-
list-name	Specifies the multicast list to be viewed.	The value is a string of 1 to 32 characters.

Parameter

Description

Value

ipv6

Indicates an IPv6 multicast profile.

list-name

Specifies the multicast list to be viewed.

The value is a string of 1 to 32 characters.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
aaa-access	read

Usage Guidelines

Usage Scenario

Displays information about the specified multicast list, or all the multicast lists.

If the parameter list-name is not specified, information about all the multicast lists is displayed.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display information about all the configured IPv6 multicast lists.

<HUAWEI> display multicast-list ipv6
Total: 1
---------------------------------------------------------------------
Multicast-list ipv6 name  : cctv1
Index                     : 0
Source IPv6/prefix        : 11::22/64
Group IPv6/prefix         : FF00::1111/64
---------------------------------------------------------------------

**Table 1** Description of the **display multicast-list** command output
Item	Description
Multicast-list ipv6 name	Name of an IPv6 multicast list.
Index	Index of an IPv6 multicast list.
Source IPv6/prefix	IPv6 multicast source address/length of the prefix of the IPv6 multicast source address.
Group IPv6/prefix	IPv6 multicast group address/length of the prefix of the IPv6 multicast group address.
Total	Total number of IPv6 multicast lists.