display nat simple-configuration server

Function

The display nat simple-configuration server command displays the configuration of the internal server function in a simplified NAT instance.

This command is supported only on the NetEngine 8000 F1A.

Format

display nat simple-configuration server

Parameters

None

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
nat	read

Usage Guidelines

Usage Scenario

In the simplified NAT scenario, the internal server function can be configured using the nat server global, nat server protocol, or nat server protocol unnumbered interface command. To view the configuration of the internal server function in a simplified NAT instance, run the display nat simple-configuration server command.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display the configuration of the internal server function in a simplified NAT instance.

<HUAWEI> display nat simple-configuration server
nat server protocol tcp global 10.12.12.12 inside 192.168.12.12
nat server protocol udp global 10.1.1.1 inside 192.168.12.12 redirect 192.168.1.1 inbound

**Table 1** Description of the **display nat simple-configuration server** command output
Item	Description
nat server protocol tcp	TCP server information.
nat server protocol udp	UDP server information.