display nat simple-configuration service-instance-group

Function

The display nat simple-configuration service-instance-group command displays information about a service-instance-group service instance group and a service-location backup group that are generated by default in a simplified NAT instance.

This command is supported only on the NetEngine 8000 F1A.

Format

display nat simple-configuration service-instance-group

Parameters

None

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
nat	read

Usage Guidelines

Usage Scenario

After the nat instance simple-configuration command is run to create a simplified NAT instance, a device automatically generates a service-instance-group service instance group named default and binds it to a service-location backup group and the NAT instance to the instance group.

To view information about a service-instance-group service instance group and a service-location backup group that are generated by default in a simplified NAT instance, run the display nat simple-configuration service-instance-group.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display information about a service-instance-group service instance group and a service-location backup group that are generated by default in a simplified NAT instance.

<HUAWEI> display nat simple-configuration service-instance-group
service-instance-group _default_
 service-location 1

**Table 1** Description of the **display nat simple-configuration service-instance-group** command output
Item	Description
service-instance-group	service instance group name.
service-location	Service-location backup group.