display port split

Function

The display port split command displays the splitting status of an interface.

Format

display port split [ ifname | iftype ifnumber ]

Parameters

Parameter	Description	Value
ifname	Specifies the name of an interface.	The value is a string of case-sensitive characters and cannot contain spaces.
iftype	Specifies the type of an interface.	-
ifnumber	Specifies the number of an interface.	The value is a string of case-sensitive characters and cannot contain spaces.

Parameter

Description

Value

ifname

Specifies the name of an interface.

The value is a string of case-sensitive characters and cannot contain spaces.

iftype

Specifies the type of an interface.

ifnumber

Specifies the number of an interface.

The value is a string of case-sensitive characters and cannot contain spaces.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
device-mgr	read

Usage Guidelines

Usage Scenario

To check the splitting status of an interface, run the display port split command.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display the splitting status of all splitting-capable interfaces.

<HUAWEI> display port split 400GE 0/1/0
-----------------------------------------------------------------------------------------------------------------------------------------
Port                 Split Ability        Default Mode         Current Mode         Current Interface          Related Port
-----------------------------------------------------------------------------------------------------------------------------------------
400GE0/1/0          1*100GE              1*400GE              1*400GE              400GE0/1/0                             100GE0/1/1
                     1*400GE                                                                                   
                                        100GE0/1/2
                     1*50GE                                                                                    
                                        100GE0/1/3
                     1*40GE
-----------------------------------------------------------------------------------------------------------------------------------------

**Table 1** Description of the **display port split** command output
Item	Description
Port	Name of an interface before a split.
Split Ability	Splitting capability of an interface.
Default Mode	Default mode of an interface.
Current Mode	Splitting mode of an interface.
Current Interface	Name of an interface after a split.
Related Port	Related port. This parameter is displayed only on the F2A.