display port split slot

Function

The display port split slot command displays the splitting status of interfaces on a subcard.

Format

display port split slot slodid [ card cardid ]

Parameters

Parameter	Description	Value
card cardid	Specifies a subcard ID.	The value is an integer that ranges from 0 to 4294967295.
slot slodid	Specifies a slot ID.	The value is a string of 1 to 31 case-sensitive characters, spaces not supported.

Parameter

Description

Value

card cardid

Specifies a subcard ID.

The value is an integer that ranges from 0 to 4294967295.

slot slodid

Specifies a slot ID.

The value is a string of 1 to 31 case-sensitive characters, spaces not supported.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
device-mgr	read

Usage Guidelines

Usage Scenario

To check the splitting status of interfaces on a subcard, run the display port split slot command.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display the splitting status of all splitting-capable interfaces.

<HUAWEI> display port split slot 1 card 1
-----------------------------------------------------------------------------------------------------------------------------------------
Port                 Split Ability        Default Mode         Current Mode         Current Interface          Related Port
-----------------------------------------------------------------------------------------------------------------------------------------
100GE0/1/0           1*50GE               1*100GE              1*100GE              100GE0/1/0                 NA
                     1*40GE
                     1*100GE
100GE0/1/1           1*50GE               1*100GE              1*100GE              100GE0/1/1                 NA
                     1*40GE
                     1*100GE
100GE0/1/2           1*50GE               1*100GE              1*100GE              100GE0/1/2                 NA
                     1*40GE
                     1*100GE
100GE0/1/3           1*50GE               1*100GE              1*100GE              100GE0/1/3                 NA
                     1*40GE
                     1*100GE
100GE0/1/4           1*50GE               1*100GE              1*100GE              100GE0/1/4                 NA
                     1*40GE
                     1*100GE

**Table 1** Description of the **display port split slot** command output
Item	Description
Port	Name of an interface before a split.
Split Ability	Splitting capability of an interface.
Default Mode	Default mode of an interface.
Current Mode	Splitting mode of an interface.
Current Interface	Name of an interface after a split.
Related Port	Related port. This parameter is displayed only on the F2A.