display power

Function

The display power command displays the status of power modules.

Format

display power

Parameters

None

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
device-mgr	read

Usage Guidelines

Usage Scenario

During routine maintenance, you can run the display power command to view the status of power modules.

Precautions

After the display power slot command is run, you can view the status of power modules on the whole chassis.

In VS mode, this command is supported only by the admin VS.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display the status of power modules.

<HUAWEI> display power
No Present Mode State                                   Num                   
-------------------------------------------------------------------------------
2  Yes     AC   Normal                                  Abnormal(0)/Normal(1)
Power monitor cable state:
   Plug

**Table 1** Description of the **display power** command output
Item	Description
No	Slot ID of a power module.
Present	Whether a power module is installed in the slot.
mode	Output mode of a power module: DC: indicates direct current. AC: indicates alternating current.
State	Status of a power module.
InputPower	InputPower.
Num	Number of power modules.
Power monitor cable state	Power monitor cable state.