display optical-module version

Function

The display optical-module version command displays the version information of the optical-module.

Format

display optical-module version [ { slot slotstr [ card picid ] | interface interface-name | interface interface-type interface-number } ] [ verbose ]

Parameters

Parameter	Description	Value
slot slotstr	Displays a slot ID.	-
card picid	Displays a card ID.	-
interface	Specifies an interface.	-
interface-name	Specifies an interface name.	-
interface-type	Specifies an interface type.	-
interface-number	Specifies an interface number.	-
verbose	Display verbose information.	-

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
device-test	read

Usage Guidelines

Usage Scenario

To perform one-click query about the fixed, version information and dynamic information of all optical modules, run the preceding commands. These commands are specially intended for querying about dynamic information (such as the threshold and real-time value for the temperature, voltage, and bias current) of the optical modules when they are faulty.

For the display optical-module version command, optical modules that support upgrade include Huawei CFP (colored or gray) optical modules, QSFP28 optical modules, and mapped Acacia optical modules.

In VS mode, this command is supported only by the admin VS.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display the version information of an optical module in the specified slot card 0.

<HUAWEI> system-view
[~HUAWEI] display optical-module version slot 1 card 0 verbose
optical-module version information:
--------------------------------------------------------------------------------
ETH*/*/0
Bios                :  V110T01
Software            :  V120T02
FPGA                :  V110T04
Parameter table     :  01.14
--------------------------------------------------------------------------------
ETH*/*/1
Bios                :  V110T04
Software            :  V120T02
FPGA                :  V110T04
Parameter table     :  01.14
--------------------------------------------------------------------------------
...

# Display the version information of all optical module.

<HUAWEI> system-view
[~HUAWEI] display optical-module version
optical-module version brief information:
----------------------------------------------------
Port       VendorPN         Software               
----------------------------------------------------
ETH0/1/0   OM8575X1         V120T02                       
ETH0/1/1   OM8575X1         V120T02         
...

**Table 1** Description of the **display optical-module version** command output
Item	Description
Bios	Bios version.
Software	Software.
FPGA	FPGA version.
Parameter table	Parameter table.
Port	Interface.
VendorPN	Serial number of an optical module.