display transmission-alarm bit-error-rate

Function

The display transmission-alarm bit-error-rate command displays the bit error rate of an interface.

This command is supported only on the NetEngine 8000 F1A.

Format

display transmission-alarm bit-error-rate wan interface-number

Parameters

Parameter	Description	Value
interface-number	Specifies the number of an interface.	-
wan	WAN interface.	-

Parameter

Description

Value

interface-number

Specifies the number of an interface.

wan

WAN interface.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
interface-mgr	read

Usage Guidelines

Usage Scenario

To check the bit error rate of a WAN interface, run the display transmission-alarm bit-error-rate command.

Precautions

interface-position must be specified when the display transmission-alarm bit-error-rate command is run.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display the bit error rate on 10GE WAN interface 0/1/0.

<HUAWEI> display transmission-alarm bit-error-rate wan 0/1/0
Interface: gigabitethernet0/1/0
b1tca bit-error-rate: 0e-0
b2tca bit-error-rate: 10e-1
b3tca bit-error-rate: 10e-2

**Table 1** Description of the **display transmission-alarm bit-error-rate** command output
Item	Description
b1tca bit-error-rate	B1TCA bit error rate.
b2tca bit-error-rate	B2TCA bit error rate.
b3tca bit-error-rate	B3TCA bit error rate.
Interface	Type and number of the interface.