display transmission-alarm configuration

Function

The display transmission-alarm configuration command displays the alarm status and alarm statistics on an interface. If no alarm type is specified, alarms of all types on the interface are displayed.

This command is supported only on the NetEngine 8000 F1A.

Format

display transmission-alarm configuration [ wan interface-number ]

Parameters

Parameter	Description	Value
wan	WAN interface.	-
interface-number	Specifies the number of an interface.	-

Parameter

Description

Value

wan

WAN interface.

interface-number

Specifies the number of an interface.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
device-mgr	read

Usage Guidelines

Usage Scenario

This command can be used to view the alarm status and alarm statistics on an interface.

Precautions

If no interface is specified in the display transmission-alarm configuration command, the alarm configuration of all interfaces is displayed.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display the configurations of transmission alarm customization and suppression on WAN 0/1/0.

<HUAWEI> display transmission-alarm configuration wan 0/1/0
Interface: wan0/1/0
Filter function: disable
Damping function: enabled
Suppress value: 999
Ceiling value: 6000
Reuse value: 500
OK half decay value: 500
NG half decay value: 1000

**Table 1** Description of the **display transmission-alarm configuration** command output
Item	Description
Filter function	Filtering function status: enabled: The filtering function is enabled. The hold time is used to indicate a filtering interval. disabled: The filtering function is disabled.
Damping function	Indicates whether to enable the suppression function. Enable: The suppression function is enabled. -Disable: The suppression function is disabled.
Suppress value	Indicates the suppression threshold.
Ceiling value	Indicates the ceiling threshold.
Reuse value	Indicates the reuse threshold.
OK half decay value	Indicates the half life when the alarm is cleared.
NG half decay value	Indicates the half life when an alarm is generated.
Interface	Interface name.