display version slot
Function
The display version slot command displays the information of the current version on a specified board.
Usage Guidelines
Usage Scenario
Before upgrading a device, you can run the display version command to view the version of a specified board, including the software version, chassis model, main control boards, and interface boards. Then, you can determine whether to upgrade the device.
The actual command output varies according to the device. The device model is only an example.Example
The actual command output varies according to the device. The command output here is only an example.
# Display the information of the version on the board in a specific slot.
<HUAWEI> display version slot 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - IPU version information: IPU (Master) 1 : uptime is 1 day, 2 hours, 9 minutes StartupTime 2020/05/06 14:54:01 SDRAM Memory Size : 16384 M bytes FLASH Memory Size : 128 M bytes CFCARD Memory Size : 4096 M bytes IPU xxxx version information CPU PCB Version : xxxx REV A EPLD Version : 000 NPU PCB Version : xxxx REV A EPLD Version : 000 FPGA Version : 101 FPGA2 Version : 101 FPGA3 Version : 101 FPGA4 Version : 101 FPGA5 Version : 101 NP Version : 100 TM Version : 110 NSE Version : NSE REV A BootROM Version : 08.13
| Item | Description |
|---|---|
| StartupTime | StartupTime. |
| SDRAM Memory Size | SDRAM Memory Size. |
| FLASH Memory Size | Flash Memory Size. |
| PCB Version | PCB Version. |
| EPLD Version | EPLD Version. |
| FPGA Version | FPGA Version. |
| NP Version | NP Version. |
| TM Version | TM Version. |
| Flash Memory Size | Flash Memory Size. |