display saved-configuration configuration

Format

display saved-configuration configuration

Parameters

None

Views

All views

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
config	read

Usage Guidelines

Usage Scenario

To check parameter information about the configuration of the autosave function, including the interval at which configurations are saved and CPU usage, run the display saved-configuration configuration command.

Prerequisites

The set save-configuration command has been run to enable autosave.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display the configuration about the autosave function enabled on the device.

<HUAWEI> display saved-configuration configuration
Auto save configuration status                    : Enable
 Auto save configuration interval                  : 60 minutes 
 Save delay after configuration changed            : 10 minutes 
 The threshold of the CPU usage permitted when save : 50%(default)

**Table 1** Description of the **display saved-configuration configuration** command output
Item	Description
Auto save configuration status	The status of auto save configuration function. Enable. Disable.
Auto save configuration interval	Interval for auto-save.
Save delay after configuration changed	Auto-save delay time after a configuration change.
The threshold of the CPU usage permitted when save	Threshold of CPU usage permitted during auto-save.