display rawlink status

Function

The display rawlink status command displays information about IPv4 RawLink connections.

Format

display rawlink status [ cid cid ] [ socket-id socket-id ]

Parameters

Parameter	Description	Value
cid cid	Displays information about the RawLink connection with a specified APP CID.	The value is an integer ranging from 0 to ffffffff.
socket-id socket-id	Displays information about the RawLink connection with a specified socket ID.	The value is an integer ranging from 0 to 2147418111.

Parameter

Description

Value

cid cid

Displays information about the RawLink connection with a specified APP CID.

The value is an integer ranging from 0 to ffffffff.

socket-id socket-id

Displays information about the RawLink connection with a specified socket ID.

The value is an integer ranging from 0 to 2147418111.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
ip-stack	read

Usage Guidelines

Usage Scenario

Run the display rawlink status command to check the following information about each valid IPv4 RawLink connection on a device:

RawLink socket ID
APP CID
No information is displayed if there is no RawLink connection on the device.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display information about IPv4 RawLink connections.

<HUAWEI> display rawlink status
---------------------
    SockId        Cid
---------------------
     11998 0x808927A2
     12102 0x808927A2
     12103 0x808927A2
     12104 0x808927A2

**Table 1** Description of the **display rawlink status** command output
Item	Description
SockId	IPv4 RawLink socket ID.
Cid	APP CID.