display mpls rsvp-te rsb-content

Function

The display mpls rsvp-te rsb-content command displays information about RSVP-TE Reserve State Block (RSBs).

Format

display mpls rsvp-te rsb-content [ ingress-lsr-id tunnel-id lsp-id ]

Parameters

Parameter	Description	Value
ingress-lsr-id	Ingress LSR ID.	The value is in dotted decimal notation.
tunnel-id	Specifies the tunnel ID.	The value is an integer ranging from 0 to 65535.
lsp-id	Specifies the LSP ID.	The value is an integer ranging from 0 to 65535.

Parameter

Description

Value

ingress-lsr-id

Ingress LSR ID.

The value is in dotted decimal notation.

tunnel-id

Specifies the tunnel ID.

The value is an integer ranging from 0 to 65535.

lsp-id

Specifies the LSP ID.

The value is an integer ranging from 0 to 65535.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
mpls-te	read

Usage Guidelines

Usage Scenario

The display mpls rsvp-te rsb-content command can be run on a device to display information about the RSBs of the RSVP-TE tunnel that pass through the device. If no parameter is specified, the display mpls rsvp-te rsb-content command displays information about all RSBs on the device.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display information about RSBs on an interface.

<HUAWEI> display mpls rsvp-te rsb-content
-------------------------------------------------------------------------------
                       The RSB Content
-------------------------------------------------------------------------------
 Tunnel Addr: 4.4.4.9                     Session Tunnel ID: 1
 Tunnel ExtID: 1.1.1.9
 Next Hop: 10.2.1.2                       Reservation Style: SE Style
 Reservation Incoming Interface: GigabitEthernet0/1/0
 Reservation Interface: GigabitEthernet0/1/0
 Message ID: 0
 Filter Spec Information-
   The filter number: 1
   Ingress LSR ID: 1.1.1.9         Local LSP ID: 24      OutLabel: 32846
   Cleanup Timer : -
 RRO Information-
   -----
 FlowSpec Information-
   Token bucket rate: 2500000
   Token bucket size: 1000
   Peak data rate: 2500000
   Minimum policed unit: 1
   Maximum packet size: 1500
   Bandwidth guarantees: 0
   Delay guarantees: 0
   Qos Service is Controlled  
 LSP Attribute Information-
   Entropy Label Capability: None
 Resv Message arrive on GigabitEthernet0/1/0 from NHOP 10.1.1.2

**Table 1** Description of the **display mpls rsvp-te rsb-content** command output
Item	Description
The filter number	Number of filters.
Tunnel Addr	Destination IP address of the tunnel, in the format of X.X.X.X.
Tunnel ID	Tunnel ID.
Tunnel ExtID	Tunnel extension ID (ingress LSR ID), in the format of X.X.X.X.
Next Hop	IP address of the next hop, in the format of X.X.X.X.
Reservation Style	Reservation style, which can be SE, FF, or WF.
Reservation Interface	Name of the interface for resource reservation.
Reservation Incoming Interface	Reservation message incoming interface.
Message ID	Summary Refresh message ID.
Filter Spec Information	Information about filter specifications.
Ingress LSR ID	Ingress LSR ID, in the format of X.X.X.X.
Local LSP ID	Local LSP ID.
LSP Attribute Information	LSP attributes.
Cleanup Timer	Cleanup timer.
RRO Information	Information about a Record Route Object (RRO), which is displayed only when route recording is enabled.
FlowSpec Information	Traffic specifications.
Token bucket rate	Token bucket rate, in Byte/s.
Token bucket size	Token bucket size, in Bytes.
Peak data rate	Peak data rate, in Byte/s.
Minimum policed unit	Minimum policed unit.
Maximum packet size	Maximum packet size.
Bandwidth guarantees	Bandwidth guarantee value.
Delay guarantees	Delay guarantee value.
Qos Service is Controlled	QoS guarantee value.
Entropy Label Capability	Entropy label capability on the egress.
Resv Message arrive on GigabitEthernet0/1/0 from NHOP 10.1.1.2	Resv messages with the next hop of 10.1.1.2 arriving on GigabitEthernet 0/1/0.
OutLabel	Outgoing label value.