emdi alarm suppress times

Function

The emdi alarm suppress times command configures the number of EMDI alarm suppression times.

The undo emdi alarm suppress times command restores the default configuration.

By default, the number of EMDI alarm suppression times is 3.

This command is supported only on the NetEngine 8000 F1A.

Format

emdi alarm suppress times value

undo emdi alarm suppress times [ value ]

Parameters

Parameter	Description	Value
value	Specifies the number of EMDI alarm suppression times.	The value is an integer ranging from 3 to 10. The default value is 3.

Parameter

Description

Value

value

Specifies the number of EMDI alarm suppression times.

The value is an integer ranging from 3 to 10. The default value is 3.

Views

EMDI view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
emdi	write

Usage Guidelines

Usage Scenario

To ensure the accuracy of EMDI alarm reporting, run the emdi alarm suppress times command to configure the number of EMDI alarm suppression times so that an alarm is reported to the NMS only after an indicator reaches the alarm threshold for the specified times.

Configuration Impact

After the number of EMDI alarm suppression times is configured, an alarm is reported to the NMS only after an indicator reaches the alarm threshold for the specified times.

For example, after the emdi alarm suppress times command has been run to configure the alarm threshold of the packet loss rate for SD video streams as 1/10000 and the number of alarm suppression times is configured as 4, an alarm is reported to the NMS only when the packet loss rate of SD video streams reaches 1/10000 for four times.

Example

# Set the number of EMDI alarm suppression times to 4.

<HUAWEI> system-view
[~HUAWEI] emdi
[~HUAWEI-emdi] emdi alarm suppress times 4