emdi monitor-period

Function

The emdi monitor-period command configures an EMDI monitoring period.

The undo emdi monitor-period command restores the default configuration.

By default, the EMDI monitoring period is 60s.

This command is supported only on the NetEngine 8000 F1A.

Format

emdi monitor-period period-value

undo emdi monitor-period [ period-value ]

Parameters

Parameter	Description	Value
period-value	Specifies an EMDI monitoring period.	The value is an enumerated type and can be 10, 30, or 60, in seconds.

Parameter

Description

Value

period-value

Specifies an EMDI monitoring period.

The value is an enumerated type and can be 10, 30, or 60, in seconds.

Views

EMDI view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
emdi	write

Usage Guidelines

Usage Scenario

With EMDI, monitoring data can be obtained from a device on a regular basis and periodically send to the uTraffic in various modes such as Telemetry. After analysis on the uTraffic, the monitoring data can be displayed in a trend chart. The monitoring period can be set to 10s, 30s, or 60s. To change the monitoring period, run the emdi monitor-period command.

Configuration Impact

The monitoring period changes lead to changes of the EMDI alarm threshold. When the monitoring period is changed from 60s to 30s/10s or from 30s/10s to 60s, the old alarm threshold is changed to the one corresponding to the new monitoring period.

Precautions

To ensure the integrity and accuracy of the monitoring data, the monitoring period changes do not take effect instantly. Instead, data is collected based on the new monitoring period upon next statistics collection.

Example

# Set the EMDI monitoring period to 10s.

<HUAWEI> system-view
[~HUAWEI] emdi
[~HUAWEI-emdi] emdi monitor-period 10
Info: Once the detection period changes, the default alarm threshold also changes. The default alarm threshold changed to (unit: 1/100000): 
SD loss packet: 100; HD loss packet: 100; 4K loss packet: 100; SD sequence error packet: 100; HD sequence error packet: 100; 4K sequence error packet: 100.