ecmp-frr-coexist enable

Function

The ecmp-frr-coexist enable command enables the coexistence of ECMP and FRR.

The undo ecmp-frr-coexist enable command disables the coexistence of ECMP and FRR.

By default, the coexistence of ECMP and FRR is disabled.

Format

ecmp-frr-coexist enable

undo ecmp-frr-coexist enable

Parameters

None

Views

MPLS-LDP view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
mpls-ldp	write

Usage Guidelines

Usage Scenario

On a network with ECMP enabled, the same types of devices reside on both end of ECMP links. If an optical fiber between the two devices is disconnected, network-wide protection fails because backup path calculation is not supported. To prevent packet loss from such a disconnection, run the ecmp-frr-coexist enable command to enable the coexistence of ECMP and FRR so that the backup paths can be established for ECMP paths.

Example

# Enable the coexistence of ECMP and FRR.

<HUAWEI> system-view
[~HUAWEI] mpls
[*HUAWEI-mpls] mpls ldp
[*HUAWEI-mpls-ldp] ecmp-frr-coexist enable