mpls mldp p2mp disable

Function

The mpls mldp p2mp disable command disables the mLDP P2MP capability on a specific interface.

The undo mpls mldp p2mp disable command restores the default mLDP P2MP capability.

By default, the mLDP P2MP capability on a specific interface of a node is the same as that configured globally on the node.

Format

mpls mldp p2mp disable

undo mpls mldp p2mp disable

Parameters

None

Views

100GE interface view, 10GE interface view, 400GE interface view, 40GE interface view, Eth-Trunk interface view, GE optical interface view, GE electrical interface view, GMPLS-UNI interface view, XGE interface view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
mpls-ldp	write

Usage Guidelines

Usage Scenario

mLDP P2MP can be disabled on a specific interface when an mLDP P2MP LSP is not expected to pass through the interface. To disable mLDP P2MP on a specific interface, run the mpls mldp p2mp disable command.

Prerequisites

MPLS LDP has been enabled globally using the mpls ldp command.

Example

# Disable mLDP P2MP on a specific interface.

<HUAWEI> system-view
[~HUAWEI] mpls
[*HUAWEI-mpls] mpls ldp
[*HUAWEI-mpls-ldp] quit
[*HUAWEI] interface GigabitEthernet 0/1/0
[*HUAWEI-GigabitEthernet0/1/0] mpls
[*HUAWEI-GigabitEthernet0/1/0] mpls ldp
[*HUAWEI-GigabitEthernet0/1/0] mpls mldp p2mp disable