ipv4-family (MPLS-LDP view)

Function

The ipv4-family command displays the MPLS LDP IPv4 view.

By default, the MPLS LDP IPv4 view is not displayed.

Format
Parameters
Views
Default Level
Task Name and Operations
Usage Guidelines
Example

Format

ipv4-family

Parameters

None

Views

MPLS-LDP view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
mpls-ldp	write

Usage Guidelines

Usage Scenario

The ipv4-family command displays the MPLS LDP IPv4 view. The lsp-trigger and propagate mapping commands can be run in the MPLS LDP IPv4 view to control the LDP IPv4 LSP establishment.

Prerequisites

The following operations have been performed:

Run the mpls command in the system view to enable MPLS globally.
Run the mpls ldp command in the system view to enable MPLS LDP globally.

Example

# Enter the MPLS LDP IPv4 view.

<HUAWEI> system-view
[~HUAWEI] mpls
[*HUAWEI-mpls] quit
[*HUAWEI] mpls ldp
[*HUAWEI-mpls-ldp] ipv4-family