esqm session aging-time

Function

The esqm session aging-time sctp command is used to configure the aging time of SCTP session.

The undo esqm session aging-time sctp command is used to recover the default aging time of SCTP session.

By default, after ESQM is enabled on a device, the default value of aging time is 300s.

This command is supported only on the NetEngine 8000 F1A.

esqm session aging-time sctp tmval

undo esqm session aging-time sctp [ tmval ]

Parameter	Description	Value
sctp tmval	Configures the aging time value.	The value is an integer that ranges from 60 to 300.

Parameter

Description

Value

sctp tmval

Configures the aging time value.

The value is an integer that ranges from 60 to 300.

Enhanced stream quality monitoring view

2: Configuration level

Task Name	Operations
esqm	write

Usage Scenario

After ESQM is enabled on a device, the default aging time of SCTP session is 300s, use this command to configure a shorter time.

# Configure the aging time of SCTP session with 60 seconds.

<HUAWEI> system-view
[~HUAWEI] esqm
[~HUAWEI-esqm] esqm session aging-time sctp 60