ethernet pvid

Function

The ethernet pvid command specifies a default VLAN ID for an interface. After the interface receives untagged packets, it adds a VLAN tag carrying the default VLAN ID to the packets.

The undo ethernet pvid command deletes the default VLAN ID of an interface.

By default, no default VLAN ID is specified for interfaces.

Format

ethernet pvid vlan-id

undo ethernet pvid [ vlan-id ]

Parameters

Parameter	Description	Value
vlan-id	Specifies the default VLAN ID of an interface.	The value is an integer ranging from 1 to 4094.

Parameter

Description

Value

vlan-id

Specifies the default VLAN ID of an interface.

The value is an integer ranging from 1 to 4094.

Views

100GE interface view, 10GE interface view, 25GE interface view, 400GE interface view, 40GE interface view, 50GE interface view, Eth-Trunk interface view, FlexE interface view, GE optical interface view, GE interface view, GE electrical interface view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
ethernet	write

Usage Guidelines

Usage Scenario

Run the ethernet pvid command to add the default VLAN ID to untagged packets.

Configuration Impact

The ethernet pvid command applies only to scenarios in which users access an L2VPN through an interface.

Example

# Specify a default VLAN ID 5 for GE 0/1/0.

<HUAWEI> system-view
[*HUAWEI] interface GigabitEthernet0/1/0
[*HUAWEI-GigabitEthernet0/1/0] ethernet pvid 5