evpn access vll convergence separate disable

Function

The evpn access vll convergence separate disable command enables the coupling flag in the EVPN-accessing-VLL direction.

The undo evpn access vll convergence separate disable command enables the decoupling flag in the EVPN-accessing-VLL direction.

By default, the decoupling flag is enabled in the EVPN-accessing-VLL direction.

Format

evpn access vll convergence separate disable

undo evpn access vll convergence separate disable

Parameters

None

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
l2vpn	write

Usage Guidelines

Usage Scenario

To enable the coupling flag in the EVPN-accessing-VLL direction, run the evpn access vll convergence separate disable command. This configuration allows EVPN services to be forwarded only through an LDP, TE, or LDP over TE LSP as the public network tunnel.

Precautions

If the coupling flag is enabled in the EVPN-accessing-VLL direction, only LDP, TE, or LDP over TE LSPs are supported on the public network side of EVPN accessing VLL.

Example

# In the system view, enable the coupling flag in the EVPN-accessing-VLL direction.

<HUAWEI> system-view
[~HUAWEI] evpn access vll convergence separate disable