evpn enhancement port

Function

The evpn enhancement port command sets the UDP port number used by the PEs in active-active mode to negotiate the EVPN prune status.

The undo evpn enhancement port command cancels the setting.

By default, no UDP port number is set for the PEs in active-active mode to negotiate the EVPN prune status.

Format

evpn enhancement port port-id

undo evpn enhancement port port-id

Parameters

Parameter	Description	Value
port-id	Specifies a port number for a UDP interface. The PEs in the active-active mode must have the same UDP port number.	The value is an integer ranging from 1025 to 65535.

Parameter

Description

Value

port-id

Specifies a port number for a UDP interface.

The PEs in the active-active mode must have the same UDP port number.

The value is an integer ranging from 1025 to 65535.

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
evpnbgp	write

Usage Guidelines

Usage Scenario

In the DCI or CloudVPN active-active scenario, BUM traffic is sent to PEs in active-active mode. However, a CE requires only one copy of BUM traffic from the PEs, and the other copy of the traffic needs to be blocked. To prevent the CE from receiving duplicate BUM traffic after the faulty PE recovers, run the evpn enhancement port command on the active-active PEs so that they can negotiate one link to forward traffic to the CE.

Precautions

This command applies only to the Admin-VS.

Example

# Set the UDP port number used by the PEs in active-active mode to negotiation the EVPN prune status to 1345.

<HUAWEI> system-view
[~HUAWEI] evpn enhancement port 1345