flexe group (system view)

Function

The flexe group command creates an FlexE group or enter the specified created FlexE group.

The undo flexe group command deletes an FlexE group already created.

By default, no FlexE group is created.

This command is supported only on the NetEngine 8000 F2A.

Format

flexe group group-index

undo flexe group group-index

Parameters

Parameter	Description	Value
group-index	Specifies the index of FlexE group.	The value is an integer that ranges from 1 to 2147483647.

Parameter

Description

Value

group-index

Specifies the index of FlexE group.

The value is an integer that ranges from 1 to 2147483647.

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
device-mgr	write

Usage Guidelines

Usage Scenario

If the flexible Ethernet mode has been enabled using the flexe enable port command, you need to run the flexe group command in the system view to create an FlexE group so that the flexible Ethernet physical interface can be added to the FlexE group and bandwidth can be allocated to the FlexE client.

Precautions

This command is supported only by the admin VS.

Example

# Create flexe group 1.

<HUAWEI> system-view
[~HUAWEI] flexe group 1

# Enter the existed flexe group 1.

<HUAWEI> system-view
[~HUAWEI] flexe group 1

# Delete flexe group 1.

<HUAWEI> system-view
[~HUAWEI] undo flexe group 1