flexe-groupnum

Function

The flexe-groupnum command configures the group number parameter of the FlexE group.

The undo flexe-groupnum restores the default group number parameter of the FlexE group.

By default, the group number parameter is not set.

This command is supported only on the NetEngine 8000 F2A.

Format

flexe-groupnum group-number

undo flexe-groupnum [ group-number ]

Parameters

Parameter	Description	Value
group-number	Specifies the group number parameter.	The value is an integer that from 1 to 1048574.

Parameter

Description

Value

group-number

Specifies the group number parameter.

The value is an integer that from 1 to 1048574.

Views

FlexE Group View

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
device-mgr	write

Usage Guidelines

Usage Scenario

To ensure proper communication between interworking devices, run the flexe-groupnum command on the interconnected FlexE groups to configure the same group number.

Example

# Cancel the group number configuration of the FlexE group 1.

<HUAWEI> system-view
[~HUAWEI] flexe group 1
[~HUAWEI-flexe-group-1] undo flexe-groupnum
Warning: The traffic on related clients may be interrupted if the operation is performed. Continue? [Y/N]:y

# Set the group number of FlexE group 1 to 2345.

<HUAWEI> system-view
[~HUAWEI] flexe group 1
[~HUAWEI-flexe-group-1] flexe-groupnum 2345
Warning: The traffic on related clients may be interrupted if the operation is performed. Continue? [Y/N]:y