set flow-stat interval

Function

The set flow-stat interval command sets the interval at which traffic statistics are collected on an interface.

The undo set flow-stat interval command restores the default interval.

By default, the interval for collecting traffic statistics on an interface is 300 seconds.

Format

set flow-stat interval interval

undo set flow-stat interval

Parameters

Parameter	Description	Value
interval	Specifies the interval at which traffic statistics are collected on an interface.	The value is an integer ranging from 10 to 600 and must be a multiple of 10, in seconds.

Parameter

Description

Value

interval

Specifies the interval at which traffic statistics are collected on an interface.

The value is an integer ranging from 10 to 600 and must be a multiple of 10, in seconds.

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
interface-mgr	write

Usage Guidelines

Usage Scenario

The interval configured in the system view for collecting traffic statistics takes effect on all the interfaces using the default traffic statistics interval.

Precautions

The interval configured in the interface view has a higher priority than that configured in the system view.

A newly configured interval takes effect only after an existing interval expires and traffic statistics are updated during the second interval after the new interval takes effect.
Management network interfaces do not support the configuration of an interval at which interface statistics are collected.

Example

# In the system view, set the interval at which traffic statistics are collected on interfaces to 200 seconds.

<HUAWEI> system-view
[~HUAWEI] set flow-stat interval 200