restart

Function

The restart command restarts an existing interface.

Format

restart

Parameters

None

Views

Layer 2 100GE interface view, 100GE interface view, Layer 2 10GE interface view, 10GE interface view, 25GE-L2 view, 25GE interface view, 400GE Layer 2 sub-interface view, 400GE-L2 view, 400GE interface view, Layer 2 40GE interface view, 40GE interface view, 50GE Layer 2 sub-interface view, Layer 2 50GE interface view, 50GE interface view, Eth-Trunk Layer 2 sub-interface view, Eth-Trunk interface view, FlexE-100G interface view, FlexE-400G interface view, FlexE-50G interface view, FlexE-50|100G interface view, FlexE sub-interface view, GE Layer 2 sub-interface view, Layer 2 GE interface view, GE optical interface view, GE interface view, GE electrical interface view, GMPLS-UNI interface view, Global-VE layer2 subinterface view, Global VE sub-interface view, Global VE interface view, LMP interface view, PW-VE sub-interface view, PW-VE interface view, Tunnel interface view, VBDIF interface view, VE layer2 subinterface view, VE sub-interface view, VE interface view, VLANIF interface view, Layer 2 sub-interface view, Sub-interface view, Management interface view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
interface-mgr	execute

Usage Guidelines

Usage Scenario

Running the restart command equals the operation of running the shutdown command and the undo shutdown command subsequently.

Example

# Restart GE 0/1/0.

<HUAWEI> system-view
[~HUAWEI] interface GigabitEthernet 0/1/0
[~HUAWEI-GigabitEthernet0/1/0] restart