peer enable (BGP-IPv4 multicast address family view) (group)

Function

The peer enable command enables an MBGP device to exchange routes with a specified multicast peer group.

The undo peer enable command disables an MBGP device from exchanging routes with a specified multicast peer group.

By default, an MBGP device is disabled from exchanging routes with a multicast peer group.

Format

peer group-name enable

undo peer group-name enable

Parameters

Parameter	Description	Value
group-name	Specifies the name of an MBGP peer group.	The value is a string of 1 to 47 case-sensitive characters, spaces not supported.

Parameter

Description

Value

group-name

Specifies the name of an MBGP peer group.

The value is a string of 1 to 47 case-sensitive characters, spaces not supported.

Views

BGP-IPv4 multicast address family view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
bgp	write

Usage Guidelines

Usage Scenario

After the peer enable command is run on an MBGP device, the MBGP device establishes an MBGP connection with a specified peer or peer group.

Example

# Enable an MBGP device to exchange routes with peer group.

<HUAWEI> system-view
[~HUAWEI] bgp 100
[*HUAWEI-bgp] group test internal
[*HUAWEI-bgp] ipv4-family multicast
[*HUAWEI-bgp-af-multicast] peer test enable