peer enable (BGP-IPv4 multicast address family view)

Function

The peer enable command enables an MBGP device to exchange routes with a specified multicast peer.

The undo peer enable command disables an MBGP device from exchanging routes with a specified multicast peer.

By default, an MBGP device is disabled from exchanging routes with a multicast peer.

Format

peer peer-address enable

undo peer peer-address enable

Parameters

Parameter	Description	Value
peer-address	Specifies the IP address of an MBGP peer.	The address is in dotted decimal notation.

Parameter

Description

Value

peer-address

Specifies the IP address of an MBGP peer.

The address is in dotted decimal notation.

Views

BGP-IPv4 multicast address family view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
bgp	write

Usage Guidelines

Usage Scenario

After the peer enable command is run on an MBGP device, the MBGP device establishes an MBGP connection with a specified peer or peer group.

Example

# Enable an MBGP device to exchange routes with peer 10.1.1.1.

<HUAWEI> system-view
[~HUAWEI] bgp 100
[*HUAWEI-bgp] peer 10.1.1.1 as-number 200
[*HUAWEI-bgp] ipv4-family multicast
[*HUAWEI-bgp-af-multicast] peer 10.1.1.1 enable