hwtacacs-server source-ip

Function

The hwtacacs-server source-ip command configures the source IP address for HWTACACS server.

The undo hwtacacs-server source-ip command deletes the configured source IP address.

By default, the IP address of HWTACACS server is not configured.

Format

hwtacacs-server source-ip ip-address

undo hwtacacs-server source-ip

Parameters

Parameter	Description	Value
ip-address	Specifies the IP address of a server.	The value is in dotted decimal notation.

Parameter

Description

Value

ip-address

Specifies the IP address of a server.

The value is in dotted decimal notation.

Views

HWTACACS server template view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
hwtacacs	write

Usage Guidelines

You can configure all HWTACACS packets sent by the device to use the same source IP address. In this way, the HWTACACS server uses only one IP address to communicate with the Router.

In this command, the source IP address for HWTACACS packets must be the same as the destination IP address for response packets from the HWTACACS server, and the source IP address must exist on the HWTACACS server.

Changing of source IP address is allowed, though requests are pending and the new source IP address is used for new requests.

Example

# To configure NAS IP address as 10.1.1.1 in template test1.

<HUAWEI> system-view
[~HUAWEI] hwtacacs-server template test1
[*HUAWEI-hwtacacs-test1] hwtacacs-server source-ip 10.1.1.1