hwtacacs-server template

Function

The hwtacacs-server template command creates a new HWTACACS server template.

The undo hwtacacs-server template command deletes the existing HWTACACS server template.

By default, the HWTACACS server template is not configured.

Format

hwtacacs-server template template-name

undo hwtacacs-server template template-name

Parameters

Parameter	Description	Value
template-name	Specifies the name of a HWTACACS server template.	It is a case-insensitive string data type. The value range is from 1 to 32 characters. The template name can have alphabets a to z (case insensitive) and numbers from 0 to 9 or symbols (".", "-" and "_").

Parameter

Description

Value

template-name

Specifies the name of a HWTACACS server template.

It is a case-insensitive string data type. The value range is from 1 to 32 characters. The template name can have alphabets a to z (case insensitive) and numbers from 0 to 9 or symbols (".", "-" and "_").

Views

System view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
hwtacacs	write

Usage Guidelines

Usage Scenario

If the template to be deleted is in use, the system prompts that the template is being used and hence cannot be deleted.

If a server template to be deleted using the undo hwtacacs-server template command is being used, release the template first.

After a server template is configured, run the hwtacacs-server shared-key command to set a shared key. To ensure the valid identities of both parties, the shared keys set on the local device and HWTACACS server must be the same.

Example

# To add new template with template name as htipl.

<HUAWEI> system-view
[~HUAWEI] hwtacacs-server template htipl
[*HUAWEI-hwtacacs-htipl]