ike peer

Function

The ike peer command creates an IKE peer and enters into the IKE peer view.

The undo ike peer command cancels the specified IKE peer.

By default, no IKE peer exists.

This command is supported only on the NetEngine 8000 F1A.

ike peer peer-name

undo ike peer peer-name

Parameter	Description	Value
peer-name	Indicates the name of IKE peer.	It is a string of 1 to 15 case sensitive characters.

Parameter

Description

Value

peer-name

Indicates the name of IKE peer.

It is a string of 1 to 15 case sensitive characters.

System view

2: Configuration level

Task Name	Operations
ike	write

The ike peer command displays the IKE peer view and then defines all the parameters for IKE peer, including:

# Configure an IKE peer named peer1 and enter the corresponding view.

<HUAWEI> system-view
[~HUAWEI] ike peer peer1
[*HUAWEI-ike-peer-peer1]