rip input

Function

The rip input command enables an interface to receive RIP packets.

The undo rip input command disables an interface from receiving RIP packets.

By default, an interface is enabled to receive RIP packets.

Format

rip input

undo rip input

Parameters

None

Views

100GE interface view, 10GE interface view, 25GE sub-interface view, 25GE interface view, 400GE interface view, 40GE interface view, 50GE sub-interface view, 50GE interface view, Eth-Trunk interface view, FlexE interface view, GE optical interface view, GE electrical interface view, GMPLS-UNI interface view, Global VE sub-interface view, Tunnel interface view, VBDIF interface view, VE sub-interface view, VLANIF interface view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
rip	write

Usage Guidelines

Usage Scenario

When a device running RIP is connected to a network running other routing protocols, you can run the rip input command on the interface that connects the device to the network to prevent the interface from receiving useless packets from the network.

Implementation Procedure

The silent-interface command that is run in a RIP process takes precedence over the rip input or rip output command that is run on an interface.

Example

# Disable GigabitEthernet 0/1/0 from receiving RIP packets.

<HUAWEI> system-view
[~HUAWEI] interface GigabitEthernet 0/1/0
[~HUAWEI-GigabitEthernet0/1/0] undo rip input