ipv6 nd ra halt

Function

The ipv6 nd ra halt command disables the device from sending RA packets to IPv6 access users.

The undo ipv6 nd ra halt command cancels the configuration.

By default, the device is enabled to send RA messages to IPv6 access users.

This command is supported only on the NetEngine 8000 F1A.

Format

ipv6 nd ra halt

undo ipv6 nd ra halt

Parameters

None

Views

AAA domain view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
aaa-access	write

Usage Guidelines

Usage Scenario

To disable the device from sending RA packets to IPv6 access users, you can run the ipv6 nd ra halt command before IPv6 access users go online.

The ipv6 nd ra halt command in the AAA domain view applies only to IPv6 users of a domain, and the ipv6 nd ra halt command in the interface view applies only to network side users.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Disable the device from sending RA packets to IPv6 access users of the isp1 domain.

<HUAWEI> system-view
[~HUAWEI] aaa
[~HUAWEI-aaa] domain isp1
[*HUAWEI-aaa-domain-isp1] commit
[~HUAWEI-aaa-domain-isp1] ipv6 nd ra halt