The l2-multicast static-group command configures a static member interface.
The undo l2-multicast static-group command cancels the configuration.
By default, a dynamic member interface is used.
l2-multicast static-group [ source-address source-address ] group-address group-address vsi vsi-name remote-peer ip-address [ negotiation-vc-id vc-id ]
undo l2-multicast static-group [ source-address source-address ] group-address { group-address | all } vsi vsi-name remote-peer ip-address [ negotiation-vc-id vc-id ]
| Parameter | Description | Value |
|---|---|---|
| source-address source-address |
Specifies a multicast source address. |
The value can be a Class A, Class B, or Class C address, in dotted decimal notation. |
| group-address group-address |
Specifies a multicast group address. |
The value ranges from 224.0.1.0 to 239.255.255.255, in dotted decimal notation. |
| vsi vsi-name |
Specifies a VSI. |
The value is a string of 1 to 31 case-sensitive characters, spaces not supported. When double quotation marks are used around the string, spaces are allowed in the string. |
| remote-peer ip-address |
Specifies the IP address of a remote peer. |
The value is in dotted decimal notation. |
| negotiation-vc-id vc-id |
negotiation-vc-id vc-id and remote-peer ip-address work together to identify a PW. By default, vc-id is the VSI ID. |
The value is an integer ranging from 1 to 4294967295. |
| all |
Indicates all of multicast groups. |
- |
Usage Scenario
If hosts connected to an interface need to regularly receive data for a multicast group or a source-specific multicast group, the l2-multicast static-group command can be used to configure the interface as a static member interface.
Static member interfaces can be configured on different positions on a network to enable users to receive data for specific multicast groups or source-specific multicast groups regularly.Prerequisites
IGMP snooping has been configured globally and in a BD.
Configuration Impact
A static member interface does not respond to IGMP Query messages. After the undo l2-multicast static-group command is run on a static member interface, the interface does not initiate an IGMP Leave message.
If the l2-multicast static-group command is run more than once, all configurations take effect.Precautions
If the number of (S, G) entries relevant to a group has reached the maximum value (128), no static entry will be created after the l2-multicast static-group command is run. This means that no entry relevant to a static multicast group will be generated even after the reset igmp-snooping group all command is run in the system view to refresh entries.
<HUAWEI> system-view [~HUAWEI] mpls [*HUAWEI-mpls] quit [*HUAWEI] mpls l2vpn [*HUAWEI-l2vpn] quit [*HUAWEI] vsi vsi0 [*HUAWEI-vsi-vsi0] pwsignal ldp [*HUAWEI-vsi-vsi0-ldp] vsi-id 100 [*HUAWEI-vsi-vsi0-ldp] quit [*HUAWEI-vsi-vsi0] quit [*HUAWEI] igmp-snooping enable [*HUAWEI] bridge-domain 10 [*HUAWEI-bd10] igmp-snooping enable [*HUAWEI-bd10] l2-multicast static-group source-address 10.1.1.2 group-address 225.1.1.2 vsi vsi0 remote-peer 10.3.3.3