l2tp chasten lns-stopccn disable

Function

The undo l2tp chasten lns-stopccn disable command is used to enable the function of locking the corresponding LNS-IP address upon receiving a STOP CCN packet.

The l2tp chasten lns-stopccn disable command is used to cancel the function of locking the corresponding LNS-IP address upon receiving a STOP CCN packet.

By default, the lns-ip chasten by-stopccn function is enabled.

This command is supported only on the NetEngine 8000 F1A.

Format

l2tp chasten lns-stopccn disable

undo l2tp chasten lns-stopccn disable

Parameters

None

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
l2tp	write

Usage Guidelines

Usage Scenario

After receiving the STOPCCN packet from the LNS, the LAC checks the result-code and error-code carried in the packet. If the LNS does not work properly, the LAC locks the corresponding LNS-IP address. This function is enabled by default.

Follow-up Procedure

Run the display l2tp variable command in the diagnostic view to check the reason why the LNS IP address is locked and the lock expiration time.

Example

# Enable the LNS IP address function after receiving STOPCCN packets.

<HUAWEI> system-view
[~HUAWEI] undo l2tp chasten lns-stopccn disable

# Disable the LNS IP address function after receiving a STOPCCN packet.

<HUAWEI> system-view
[~HUAWEI] l2tp chasten lns-stopccn disable