l2tp enable

Function

The l2tp enable command enables the L2TP function.

The undo l2tp enable command disables the L2TP function.

By default, the L2TP function is disabled.

This command is supported only on the NetEngine 8000 F1A.

Format
Parameters
Views
Default Level
Task Name and Operations
Usage Guidelines
Example

Format

l2tp enable

undo l2tp enable

Parameters

None

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
l2tp	write

Usage Guidelines

Usage Scenario

The L2TP function is available only after the l2tp enable command is configured.If the L2TP is disabled, a device cannot provide the L2TP function even if the L2TP parameters are configured.

Precautions

Running the undo l2tp enable command affects traffic of online users. Confirm the action based on the display message before running the command.

Example

# Enable the L2TP function.

<HUAWEI> system-view
[~HUAWEI] l2tp enable